PAHSU · Third Year B.Tech. Civil Engineering · NEP 2020
Advanced Concrete Technology
CIVPEC-01A · Elective I · Semester V · 4 credits · ISE 30 + ESE 70
One of the Elective I options.
Unit 1: Additions to Concrete
8 hoursPulverised fuel ash, GGBS, silica fume, rice husk ash and metakaolin: manufacture, characteristics and effects on concrete; plasticisers, superplasticisers, retarders, accelerators and curing compounds.
Examined in the 70-mark end-semester paper
- Supplementary cementitious materials
- Chemical admixtures and rheology
Unit 2: Properties of Fresh and Hardened Concrete
9 hoursWorkability, setting time, bleeding and segregation; placing and compaction; durability and impermeability, microstructure and carbonation; distress and deterioration, non-destructive tests, damage assessment and crack repair.
Examined in the 70-mark end-semester paper
- Workability, segregation and bleeding
- Batching, mixing, placing, compaction and curing
- Microstructure and the interfacial transition zone
- Carbonation and chloride ingress
- Non-destructive and semi-destructive tests
- Diagnosing distressed concrete
- Repair materials and methods
Unit 3: Special Concretes
6 hoursHigh-performance, high-strength, fibre-reinforced, lightweight, high-density and radiation-shielding, high-volume fly ash and self-compacting concretes; 3D printing in construction.
Examined in the 70-mark end-semester paper
- High-strength and high-performance concrete
- Self-compacting and ultra-high-performance concrete
- Fibre-reinforced concrete
- Lightweight and no-fines concrete
- Lightweight, pervious and high-density concrete
- 3D-printed and smart concrete
Unit 4: Special Processes and Technologies
8 hoursMass, sprayed, ferrocement, pumped and roller-compacted concrete; sustainability of the concrete industry; cement blanket and Mivan technology.
Examined in the 70-mark end-semester paper
- Mass and roller-compacted concrete
- Ready-mixed and pumped concrete
- Geopolymer concrete and ferrocement
- Shotcrete and sprayed concrete
- Green concrete and life-cycle assessment
- Types and materials of formwork
Unit 5: Ready-Mixed Concrete and Quality
7 hoursTypes of RMC plant, specification, central-plant process, transport and code recommendations; principles, standards and tools of quality control in concrete construction.
Examined in the 70-mark end-semester paper
- Ready-mixed concrete
- Statistical quality control of concrete
Unit 6: Mix Design
7 hoursReview of mix design methods and philosophies, mix design for special purposes and high-grade concrete, variability of results.
Examined in the 70-mark end-semester paper
- Mix design to IS 10262:2019
- ACI and DoE methods of mix design
- Performance-based mix proportioning
Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).