PAHSU SY Mechanical syllabus

PAHSU · Second Year B.Tech. Mechanical Engineering · NEP 2020

Manufacturing Processes

MECHPCC-02 · Semester III · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Basics of Casting Processes

    5 hours

    Basic steps in casting; patterns, their types, materials and allowances; types of cores; the gating system; types and functions of risers, improving riser efficiency and simple riser design.

    Examined in the 70-mark end-semester paper

    • Patterns and pattern allowances
    • Moulding sand and cores
    • Gating system and mould filling time
    • Riser design and solidification
  2. Unit 2: Melting, Moulding and Inspection Processes

    6 hours

    Cupola, arc and induction furnaces; green-sand hand and machine moulding, shell moulding, investment, centrifugal, gravity and pressure die casting; fettling, common casting defects and inspection; computers and mechanisation in the foundry.

    Examined in the 70-mark end-semester paper

    • Melting furnaces: cupola, crucible, arc and induction
    • Special casting processes
    • Casting defects and remedies
  3. Unit 3: Introduction to Joining Processes

    4 hours

    Classification of welding processes; arc welding and electrode selection, TIG, MIG and submerged arc welding; gas welding, resistance welding, brazing and soldering.

    Examined in the 70-mark end-semester paper

    • Arc welding: MIG and TIG
    • Gas welding and flames
    • Resistance welding
    • Soldering, brazing and weld joints
  4. Unit 4: Conventional Forming Processes

    6 hours

    Classification of forming processes; forging, its types and upset forging; direct, indirect, impact and hydrostatic extrusion; wire and tube drawing; hot and cold rolling, rolling mills and the theory of rolling, with simple numericals.

    Examined in the 70-mark end-semester paper

    • Fundamentals of metal forming
    • Forging and forging load
    • Extrusion, wire and tube drawing
    • Rolling and rolling load
  5. Unit 5: Advanced Forming Processes

    4 hours

    High energy rate forming: explosive, electro-hydraulic and magnetic pulse forming; forming with hydrostatic pressure: hydro-mechanical forming and hydroforming.

    Examined in the 70-mark end-semester paper

    • High energy rate forming processes
    • Hydroforming and hydro-mechanical forming
  6. Unit 6: Advanced Manufacturing Processes

    5 hours

    Rapid prototyping: principles, classification and steps, advantages and applications; stereolithography, selective laser sintering, selective powder binding, fused deposition modelling and direct metal laser sintering.

    Examined in the 70-mark end-semester paper

    • Additive versus conventional manufacturing
    • Classification of AM processes
    • Stereolithography and DLP
    • Selective laser sintering and melting
    • Binder jetting
    • Fused deposition modelling

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).