PAHSU SY Mechanical syllabus

PAHSU · Second Year B.Tech. Mechanical Engineering · NEP 2020

Fluid Mechanics and Fluid Machines

MECHPCC-06 · Semester IV · 4 credits · ISE 30 + ESE 70

No numericals on metacentric height, on the hydraulic gradient and energy lines or on power transmission through pipes, and none on centrifugal pumps.

  1. Unit 1: Fluid Statics

    5 hours

    Total pressure and centre of pressure on horizontal, vertical and inclined immersed surfaces; buoyancy and Archimedes' principle, equilibrium of submerged and floating bodies, the metacentre and metacentric height.

    Examined in the 70-mark end-semester paper

    • Forces on submerged plane and curved surfaces
    • Buoyancy and stability of floating bodies
  2. Unit 2: Fluid Kinematics and Dynamics

    8 hours

    Types of flow; streamlines, path lines and streak lines; velocity and acceleration components; velocity potential, equipotential lines and the Laplace equation; stream function; the continuity equation; Euler's and Bernoulli's equations and the venturimeter, pitot tube and orifice meter.

    Examined in the 70-mark end-semester paper

    • Types of flow and flow description
    • Continuity equation
    • Stream function, velocity potential and flow nets
    • Euler's equation and Bernoulli's theorem
    • Venturimeter, orifice meter and pitot tube
  3. Unit 3: Flow Through Pipes

    7 hours

    Major and minor losses and the Darcy-Weisbach equation; equivalent pipes; hydraulic gradient and total energy lines; pipes in series and parallel; power transmission through pipes and the condition for maximum power.

    Examined in the 70-mark end-semester paper

    • Major and minor losses and the Moody chart
    • Pipes in series and parallel and equivalent pipe
    • Hydraulic gradient and energy lines
    • Siphons and power transmission through pipes
  4. Unit 4: Dimensional Analysis and Forces on Immersed Bodies

    4 hours

    Dimensions of fluid properties, dimensional analysis and Buckingham's pi theorem; drag and lift on immersed bodies.

    Examined in the 70-mark end-semester paper

    • Dimensional homogeneity
    • Buckingham's π theorem
    • Drag and lift
  5. Unit 5: Water Turbines

    9 hours

    Euler's equation for rotodynamic machines and the classification of water turbines; the Pelton wheel, its work done, efficiencies and runner design; construction and working of Francis and Kaplan turbines, work done and efficiencies of the Francis turbine; draft tubes and the governing of turbines.

    Examined in the 70-mark end-semester paper

    • Classification of turbomachines
    • Velocity triangles and work done
    • Pelton wheel design
    • Francis and Kaplan turbine design
    • Draft tubes and turbine characteristics
  6. Unit 6: Centrifugal Pumps

    7 hours

    Working principle, construction and types; heads, multistage pumps and velocity triangles; minimum starting speed, maximum suction height and NPSH; efficiencies, discharge, blade angles, power and specific speed.

    Examined in the 70-mark end-semester paper

    • Components and working of centrifugal pumps
    • Centrifugal pumps: heads, efficiencies and minimum starting speed
    • Multistage centrifugal pumps
    • NPSH and cavitation in pumps
    • Specific speed and priming

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).