PAHSU SY Mechanical syllabus

PAHSU · Second Year B.Tech. Mechanical Engineering · NEP 2020

Applied Thermodynamics

MECHPCC-01 · Semester III · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Basic Laws of Thermodynamics

    6 hours

    First law applied to chemically reacting systems: standard enthalpy of reaction and of formation; the second law: heat engine, refrigerator and heat pump, Kelvin-Planck and Clausius statements and their equivalence, reversibility and irreversibility, the Clausius inequality; entropy change for a phase change, for an ideal gas and in adiabatic mixing.

    Examined in the 70-mark end-semester paper

    • Combustion and enthalpy of formation
    • Heat engines, refrigerators and heat pumps
    • Kelvin–Planck and Clausius statements
    • Equivalence of the statements and PMM-II
    • Reversible and irreversible processes
    • Clausius inequality and entropy
    • Entropy change of an ideal gas
  2. Unit 2: Steam Generators

    6 hours

    Formation and properties of steam, steam tables, T-s, T-h and Mollier diagrams; classification of boilers, evaporative capacity, equivalent evaporation, factor of evaporation and boiler efficiency; heat losses in a boiler plant and the heat balance sheet; waste heat recovery.

    Examined in the 70-mark end-semester paper

    • Formation of steam and its properties
    • Steam tables and the Mollier chart
    • Classification of boilers and the IBR Act
    • Fire-tube and water-tube boilers
    • Boiler performance: equivalent evaporation and efficiency
  3. Unit 3: Vapour Power Cycles

    3 hours

    Classification of thermodynamic cycles; the Carnot vapour cycle, the simple and actual Rankine cycles, performance parameters, and the effect of operating conditions on Rankine cycle efficiency.

    Examined in the 70-mark end-semester paper

    • Carnot and Rankine cycles
    • Improving Rankine cycle performance
  4. Unit 4: Steam Nozzles and Turbines

    6 hours

    Types of nozzles and the flow of steam through them; advantages and classification of steam turbines, the simple impulse turbine, compounding, Parsons' reaction turbine, velocity diagrams, work done and efficiencies.

    Examined in the 70-mark end-semester paper

    • Steam nozzles: maximum discharge and supersaturated flow
    • Steam turbines: compounding and velocity diagrams
    • Impulse steam turbines
    • Reaction steam turbines and degree of reaction
  5. Unit 5: Steam Condensers

    3 hours

    Elements of a steam condensing plant, advantages of condensers, types of condenser, vacuum efficiency and condenser efficiency.

    Examined in the 70-mark end-semester paper

    • Steam condensers and cooling towers
    • Condenser and vacuum efficiency
  6. Unit 6: Reciprocating Air Compressors

    6 hours

    Classification and construction of single- and multistage compressors; work of polytropic, isentropic and isothermal compression, the effect of clearance, compressor efficiencies and free air delivery; the need for multistage compression; properties of lubricants.

    Examined in the 70-mark end-semester paper

    • Reciprocating air compressors and multistaging
    • Single-stage reciprocating compressor
    • Clearance volume and volumetric efficiency
    • Multistage compression and intercooling

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).