PAHSU Final Year Mechanical syllabus

PAHSU · Final Year B.Tech. Mechanical Engineering · NEP 2020

Automation and Robotics

MECHPCC-13 · Semester VII · 3 credits · ISE 30 + ESE 70

  1. Unit 1: Fundamentals of Robotics

    6 hours

    History of industrial robots; ISO and IFR definitions of industrial and service robots; basic components, classification by structure and specifications; collaborative robots compared with industrial robots; AGVs and AMRs, their navigation and uses.

    Examined in the 70-mark end-semester paper

    • Robot anatomy and configurations
    • Robot specifications and work envelope
    • Cobots and additive manufacturing in CIM
    • Localisation: GPS, INS and SLAM
  2. Unit 2: Sensors, Actuators and End Effectors

    8 hours

    Encoders, potentiometers, LVDTs, resolvers, tachometers, Hall-effect, strain-gauge and piezo sensors, limit, proximity, ultrasonic, IR, laser and vision sensors and their selection; hydraulic, pneumatic and electric actuators, stepper and servo motors; mechanical, vacuum and magnetic grippers and their selection.

    Examined in the 70-mark end-semester paper

    • Robot sensors
    • Robot drive systems
    • Servo and stepper motors
    • Grippers and end effectors
  3. Unit 3: Robot Kinematics and Control

    6 hours

    Degrees of freedom and coordinate systems; forward and inverse kinematics of 2-DOF planar arms and forward kinematics of 3-DOF arms; trajectory planning, the velocity Jacobian and singularities; non-servo and servo (point-to-point and continuous-path) control; force, PID and adaptive control.

    Examined in the 70-mark end-semester paper

    • Homogeneous transformations
    • Forward kinematics and DH parameters
    • Inverse kinematics
    • Manipulator Jacobian
    • Robot arm dynamics: an introduction
  4. Unit 4: Machine Vision

    7 hours

    Machine vision components and applications; light sources and lighting techniques; image-processing steps; CCD and CMOS sensors; area-scan and line-scan cameras, calibration and camera selection.

    Examined in the 70-mark end-semester paper

    • Machine vision
  5. Unit 5: Robot Work Cells and Programming

    7 hours

    Robot-centred, in-line and mobile work cells and their design; sequence control, operator interface and safety monitoring; work-cell controllers and HMIs; work-cell safety; robot programming languages, lead-through, walk-through and offline programming.

    Examined in the 70-mark end-semester paper

    • Robot cell design and applications
    • Robot safety
    • Robot programming
  6. Unit 6: Industrial Applications of Robotics

    6 hours

    Selecting robots for material handling, pick-and-place, machine tending, spot and continuous welding, sealing, spray painting and assembly; automated storage and retrieval systems, their components and types.

    Examined in the 70-mark end-semester paper

    • Robots in material transfer, palletising and machine loading
    • Automated material handling: conveyors, AGVs and AS/RS

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).