PAHSU Final Year Electrical syllabus

PAHSU · Final Year B.Tech. Electrical Engineering · NEP 2020

Instrumentation Process Control & Robotics

EEPEC-05B · Programme Elective V · Semester VIII · 4 credits · End-semester 100 only

One of the Programme Elective V options. A self-learning course (4 hours a week) examined only by a 100-mark end-semester exam.

  1. Unit 1: Fundamentals of Process Control

    8 hours

    Elements of the process control loop: process, set point, controlled, manipulated and load variables; loop symbols and temperature, flow, level and pressure loops; process equation, capacity, self-regulation, disturbances, control and process lag and dead time.

    Examined in the 100-mark end-semester paper

    • Process control loops and process characteristics
    • Discrete, batch and continuous process control
  2. Unit 2: Controller Principles

    8 hours

    Error, range, cycling and direct or reverse action; two-position, multi-position and floating control; P, I, D, PI, PD and PID modes; reset windup, rate before reset and bumpless transfer.

    Examined in the 100-mark end-semester paper

    • Discontinuous controller modes and practical PID issues
    • P, PI and PID controllers
  3. Unit 3: Tuning of Controllers

    8 hours

    Tuning criteria: quarter amplitude decay, loop disturbance, optimum control and quality measures; the process reaction curve, Ziegler-Nichols and frequency response tuning methods.

    Examined in the 100-mark end-semester paper

    • Ziegler-Nichols tuning
    • PID tuning
  4. Unit 4: Robotics

    6 hours

    Robot anatomy and definition; the laws of robotics, history and terminology; accuracy and repeatability.

    Examined in the 100-mark end-semester paper

    • Robot components and specifications
    • Robot configurations
    • Resolution, accuracy and repeatability
  5. Unit 5: Elements of Robots: Links, Joints, Actuators and Sensors

    9 hours

    Position and orientation of rigid bodies; homogeneous transformations; D-H parameters for joints and links; stepper, DC servo and brushless actuators and servo motor modelling; transmissions; internal and external sensors: encoders, tachometers, force/torque, proximity and distance sensors and vision.

    Examined in the 100-mark end-semester paper

    • Rotation matrices
    • Homogeneous transformations
    • Denavit-Hartenberg representation
    • Robot drives and actuators
    • Position sensors and encoders
    • Range, touch and force sensors
    • Safety sensors and machine vision
  6. Unit 6: Kinematics of Serial Robots

    9 hours

    Direct and inverse kinematics; kinematics of common serial manipulators; workspace analysis; inverse kinematics of constrained and redundant robots; the tractrix-based approach for fixed and free robots.

    Examined in the 100-mark end-semester paper

    • Forward kinematics of SCARA and PUMA
    • Inverse kinematics
    • Robot workspace and redundant manipulators

Unit contents are summarised from the official PAHSU syllabus . AiCanCode.org is not affiliated with Punyashlok Ahilyadevi Holkar Solapur University (PAHSU).