Electrical Engineering (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Electrical Engineering (University)

Robotics and Automation

Robot anatomy, transformations and dynamics, DH kinematics, robot sensors, Jacobian and joint control, applications.

Interview questions
Notes for Robotics and Automation are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in Robotics and Automation

  1. Robot components and specifications· notes coming
  2. Robot configurations· notes coming
  3. Servo and non-servo robots· notes coming
  4. Rotation matrices· notes coming
  5. Homogeneous transformations· notes coming
  6. Robot dynamics by Lagrange's equation· notes coming
  7. Denavit-Hartenberg representation· notes coming
  8. Forward kinematics of SCARA and PUMA· notes coming
  9. Inverse kinematics· notes coming
  10. Position sensors and encoders· notes coming
  11. Range, touch and force sensors· notes coming
  12. Safety sensors and machine vision· notes coming
  13. Manipulator Jacobian and singularities· notes coming
  14. Robot joint control· notes coming
  15. Trajectory profiles· notes coming
  16. Industrial robot applications· notes coming
  17. Robot vision for inspection· notes coming
  18. Robot cell design and safety· notes coming
  19. Automation principles and strategies· notes coming
  20. Levels of automation· notes coming
  21. Robot grippers· notes coming
  22. Robot drives and actuators· notes coming
  23. Industrial control systems· notes coming
  24. Machine vision: acquisition and processing· notes coming
  25. Robot programming methods· notes coming
  26. Modelling and simulation of manufacturing plants· notes coming
  27. AI and fuzzy control in automation· notes coming
  28. Resolution, accuracy and repeatability· notes coming
  29. Joint space and task space control· notes coming
  30. Obstacle avoidance and path planning· notes coming
  31. PLC scan cycle and I/O modules· notes coming
  32. Ladder logic, instruction list and function blocks· notes coming
  33. Mechatronic systems and the design process· notes coming
  34. Mechanical actuation: cams, gear trains, belt drives and bearings· notes coming
  35. Modelling and co-simulation of mechatronic systems· notes coming
  36. Serial interface standards: RS232, RS485 and GPIB· notes coming
  37. Mechatronics case studies· notes coming
  38. Micro-actuators, micro-robots and micro-pumps· notes coming
  39. Process control loops and process characteristics· notes coming
  40. Discontinuous controller modes and practical PID issues· notes coming
  41. Robot workspace and redundant manipulators· notes coming