Mumbai University SE Mechanical syllabus

Mumbai University · Second Year Mechanical Engineering · NEP 2020

Material Science

2403114 · Semester III · 3 credits · Internal tests 40 + end-semester 60

End-semester paper (2 hours): Six questions of 20 marks; Q1 is compulsory and you answer three.

  1. Module 1: Crystals and Imperfections

    8 hours

    Classes of engineering materials; crystalline and non-crystalline materials; unit cells, crystal systems, planes and directions; point, line, surface and volume defects; dislocations, critical resolved shear stress and slip in FCC, BCC and HCP.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Classification of engineering materials
    • Crystal structures and Miller indices
    • Crystal imperfections and diffusion
    • Dislocations, slip systems and critical resolved shear stress
  2. Module 2: Hot and Cold Working

    5 hours

    Effects and mechanisms of cold and hot working; recrystallisation annealing, its stages and the factors affecting it.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Cold working and strain hardening
    • Recrystallisation annealing
    • Hot working
  3. Module 3: Crystallisation and Phase Transformations

    7 hours

    Homogeneous and heterogeneous nucleation and growth; solidification and cooling curves; classification of alloys; isomorphous, eutectic and peritectic phase diagrams.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Nucleation and growth
    • Solidification of metals and alloys
    • Cooling curves and phase diagrams
    • Isomorphous, eutectic and peritectic systems
  4. Module 4: Iron–Iron Carbide Diagram

    8 hours

    Invariant reactions; microstructures of hypo- and hyper-eutectoid steels; TTT and CCT diagrams; hardenability and its tests; graphitisation in cast irons.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Iron–carbon equilibrium diagram
    • Hypo- and hyper-eutectoid steels
    • TTT and CCT diagrams
    • Hardenability and its tests
    • Cast irons
  5. Module 5: Heat Treatment and Alloy Steels

    6 hours

    Annealing, normalising, hardening and tempering; austempering and martempering; carburising, nitriding, cyaniding, carbonitriding, induction and flame hardening; stainless, tool, maraging and ausformed steels.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Annealing and normalising
    • Hardening, tempering and hardenability
    • Austempering, martempering and sub-zero treatment
    • Surface hardening
    • Stainless steels and tool steels
    • Maraging and ausformed steels
  6. Module 6: Fracture and Failure

    5 hours

    Ductile and brittle fracture; the ductile-to-brittle transition; Griffith's criterion and Orowan's modification; fatigue limits, tests and S–N curves; creep, its stages and creep-resistant materials.

    Examined in one of the two internal tests and in the 60-mark end-semester paper

    • Ductile and brittle fracture
    • Griffith's criterion and DBTT
    • Fatigue and S–N curves
    • Creep and creep testing

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.