Mumbai University · Second Year Mechanical Engineering · NEP 2020
Manufacturing Processes
2404112 · Semester IV · 3 credits · Internal tests 40 + end-semester 60
End-semester paper (2 hours): Six questions of 20 marks; Q1 is compulsory and you answer three. Each module's share of the paper follows its lecture hours.
Module 1: Manufacturing Processes and Casting
6 hoursClassification of manufacturing processes; pattern materials, types and allowances; sand and machine moulding; gating and risers; CO2, shell, investment, die and vacuum casting; inspection and casting defects.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Classification of manufacturing processes
- Patterns and pattern allowances
- Moulding sand and cores
- Gating system and mould filling time
- Riser design and solidification
- Special casting processes
- Casting defects and remedies
Module 2: Joining Processes
7 hoursAdhesive bonding and mechanical fastening; welding and hybrid joining; gas, arc, chemical, radiant and solid-state welding; joints and positions; welding defects and remedies.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Adhesive bonding and mechanical fastening
- Gas welding and flames
- Arc welding: MIG and TIG
- Solid-state and modern welding processes
- Welding defects and inspection
Module 3: Metal Forming and Sheet Metal
6 hoursHot and cold working; forging and rolling and their defects; extrusion; wire and tube drawing; sheet metal operations, presses and dies.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Fundamentals of metal forming
- Rolling and rolling load
- Forging and forging load
- Extrusion, wire and tube drawing
- Sheet metal operations and presses
Module 4: Machine Tools and Machining
10 hoursLathes, milling, drilling and grinding machines and wheel selection; broaching, lapping, honing, shaping, slotting and planing; gear milling, hobbing, shaping, shaving and grinding; single-point tool geometry; speed, feed and depth of cut; chip formation.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Lathe and milling operations
- Drilling, shaping and broaching machines
- Grinding machines and processes
- Grinding wheels: designation and selection
- Honing and lapping
- Gear manufacturing processes
- Single-point cutting tool geometry
- Chip formation and types of chips
Module 5: Non-traditional Machining
4 hoursElectrochemical, electric-discharge, ultrasonic and laser beam machining.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- ECM, EDM, USM and laser beam machining
Module 6: Polymers, Powder Metallurgy and Industry 4.0
6 hoursMoulding thermoplastics and thermosets; powder making, compaction, sintering and finishing; intelligent manufacturing, cyber-physical systems, IoT-enabled and cloud manufacturing.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Polymer moulding processes
- Powder metallurgy: compaction and sintering
- Intelligent manufacturing and Industry 4.0
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.