Mumbai University · Second Year Civil Engineering · NEP 2020
Building Materials and Concrete Technology
2093113 · Semester III · 3 credits · Internal tests 40 + end-semester 60
End-semester paper (2 hours): Six questions of 15 marks; Q1 is compulsory and you answer four.
Module 1: Building Materials I
6 hoursRole and classification of materials; building stones, quarrying and dressing; burnt clay bricks and BIS tests; concrete, paver, AAC and CLC blocks; ceramic tiles; glass; natural and engineered timber and its treatment.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Classification of building materials
- Building stones
- Bricks and blocks
- Glass and timber
Module 2: Building Materials II
6 hoursMortars; stone and brick masonry and bonds; pointing, plastering and painting; damp-proofing, waterproofing and termite proofing.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Mortars
- Stone and brick masonry and finishes
- Damp, water and termite proofing
Module 3: Constituents of Concrete
6 hoursFine and coarse aggregates, grading and alkali–aggregate reaction; manufactured sand; OPC grades, manufacture, composition and hydration; types of cement; lime; mineral and chemical admixtures.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Aggregates and their properties
- Cement: manufacture, types and hydration
- Lime
- Admixtures and fibres
Module 4: Concrete
5 hoursGrades and manufacture; batch reports and w/c ratio; fresh and hardened properties and workability; vibration; durability and permeability; RCPT.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Workability and its tests
- Strength of hardened concrete
- Durability: sulphate attack and alkali–silica reaction
- Permeability and the rapid chloride penetration test
Module 5: Concrete Mix Design
9 hoursTypes of mix to IS 456; mix design for compressive and flexural strength to IS 10262; curing; batching quantities for different grades.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Principles of mix design
- IS 10262 mix design method
- Batching, mixing, placing and curing
Module 6: Special Concreting and NDT
6 hoursReady-mixed concrete plants, transport and placing; hot-weather, cold-weather and mass concreting; rebound hammer and ultrasonic pulse velocity tests.
Examined in one of the two internal tests and in the 60-mark end-semester paper
- Ready-mixed concrete
- Hot-weather, cold-weather and mass concreting
- Non-destructive testing of concrete
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.