Mumbai University BE Electrical syllabus

Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme

Electrical System Design, Management and Auditing

EEC801 · Semester VIII · 4 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.

All notes for this subject
  1. Module 1: Introduction

    5 hours

    Types of electrical projects and systems; components; plans, drawings and single-line diagrams; tendering and estimation.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Types of electrical projects
    • Electrical drawings and single-line diagrams
    • Tendering and estimation
  2. Module 2: Design of Power Distribution Systems

    10 hours

    Distribution systems and their selection; earthing; load size, load and diversity factors and future estimates; substation equipment; transformer selection and sizing; HT and LT switchgear, metering, switchboards and MCCs; protection coordination; IS standards.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Selection of distribution systems
    • Earthing design
    • Load estimation: load and diversity factors
    • Transformer selection and sizing
    • HT and LT switchgear selection
    • Protection coordination and discrimination
  3. Module 3: Cables and Auxiliary Systems

    7 hours

    Cable selection, sizing, installation and management; bus bar design; emergency supplies: UPS, DG sets and batteries; preliminary interior lighting design.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Cable selection and sizing
    • Bus bar design
    • UPS, DG sets and batteries
    • Preliminary interior lighting design
  4. Module 4: Energy Monitoring and Targeting

    10 hours

    Monitoring and targeting; CUSUM; electricity billing; load management and maximum demand control; power factor improvement and capacitor placement; distribution and transformer losses.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Energy monitoring and targeting
    • CUSUM technique
    • Electricity billing
    • Maximum demand control
    • Power factor improvement and capacitor placement
  5. Module 5: Energy Audit

    10 hours

    Energy Conservation Act 2001; types of audit and approach; energy costs; benchmarking; optimising energy input; audit instruments; performance of motors, drives and lighting; HVAC energy.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Energy Conservation Act and ECBC
    • Types of energy audit
    • Energy audit instruments
    • Benchmarking and audit reporting
    • Energy performance of motors, drives and lighting
  6. Module 6: Energy-efficient Technologies

    10 hours

    BLDC fans; smart lighting; MD controllers and APFC; energy-efficient motors and transformers; soft starters and VFDs; savings potential; EMS and BMS.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Energy-efficient motors and transformers
    • VFDs and soft starters
    • Smart lighting and BLDC fans
    • Building management systems

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.