Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme
Electrical Machine Design
EEDO7024 · Department Optional Course 4 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80
End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.
One of the Department Optional Course 4 options.
Module 1: Introduction
4 hoursDesign considerations; materials and space factor; specific loadings; heat flow, temperature rise and rating.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Specific electric and magnetic loadings
- Electrical engineering materials and space factor
- Temperature rise and rating of machines
Module 2: Transformers
7 hoursMain dimensions and kVA output; window space factor; overall dimensions; regulation and no-load current; temperature rise, tank design and cooling.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Output equation of a transformer
- Design of the core and frame
- Design of transformer windings
- Cooling and tank design
Module 3: Induction Motors
10 hoursMain dimensions; air gap; rotor slots; rotor bars and end rings; wound rotors; leakage reactance; magnetising and short-circuit current; circle diagram.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Output equation of an induction motor
- Main dimensions and stator design
- Air gap length
- Cage rotor design
- Wound rotor design
- Leakage reactance of induction motors
- Magnetising current calculation
Module 4: Synchronous Machines
10 hoursMain dimensions; salient-pole design; SCR and pole face; armature design; air gap; rotor, damper and field windings; full-load field MMF; turbo-alternators.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Main dimensions of synchronous machines
- Salient pole machine design
- Short-circuit ratio and air gap of synchronous machines
- Field and damper winding design
- Turbo-alternator design
Module 5: Machines for Special Applications
4 hoursPMSM, BLDC, SRM and claw-pole machines; sizing EV motors; designing an EV-grade induction motor.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Brushless motor fundamentals
- PMSM design
- Switched reluctance motor design
- Sizing EV induction motors
Module 6: Computer-aided Design
4 hoursLimits of traditional design; analysis, synthesis and hybrid methods; optimisation variables, constraints and objectives; FEM-based design.
Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then
- Computer-aided transformer design
- Design optimisation methods
- FEM-based machine design
Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.