Mumbai University BE Electrical syllabus

Mumbai University · Final Year Electrical Engineering · Rev-2019 'C' Scheme

Automation and Control

EEDO8012 · Department Optional Course 5 · Semester VIII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four.

One of the Department Optional Course 5 options.

All notes for this subject
  1. Module 1: Introduction

    6 hours

    Laws and degrees of freedom; robot anatomy, classification and parameters; need, principles and strategies of automation; elements and levels of automation.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Robot components and specifications
    • Robot configurations
    • Automation principles and strategies
    • Levels of automation
  2. Module 2: Grippers and Sensors

    8 hours

    Types and design of grippers and their force analysis; characteristics, selection and classes of sensors; vision in robot control.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Robot grippers
    • Range, touch and force sensors
    • Safety sensors and machine vision
  3. Module 3: Drives and Control Systems

    6 hours

    Drives, actuators and transmissions; controllers; industrial control systems; continuous and discrete control.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Robot drives and actuators
    • Industrial control systems
  4. Module 4: Kinematics

    8 hours

    Transformation matrices; DH parameters; direct and inverse kinematics; Jacobians, singularities and static forces; dynamics; trajectory generation.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Homogeneous transformations
    • Denavit-Hartenberg representation
    • Inverse kinematics
    • Manipulator Jacobian and singularities
    • Trajectory profiles
  5. Module 5: Machine Vision and Robot Programming

    6 hours

    Image acquisition, sampling and processing; noise reduction, edges and segmentation; lead-through programming; motion interpolation; WAIT, SIGNAL and DELAY; subroutines.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Machine vision: acquisition and processing
    • Robot programming methods
  6. Module 6: Modelling and Simulation for Plant Automation

    5 hours

    Modelling a manufacturing plant; neural networks, AI and fuzzy control in manufacturing automation.

    Examined in the 80-mark end-semester paper; the class tests cover what has been taught by then

    • Modelling and simulation of manufacturing plants
    • AI and fuzzy control in automation

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.