KBCNMU TY Mechanical syllabus

KBCNMU · Third Year B.E. Mechanical Engineering · NEP 2020

Heat Transfer & Thermal Machines

ME-503 · Semester V · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Steady-State Conduction

    9 hours

    One-dimensional steady conduction in plane, cylindrical and spherical geometry, conduction and film resistances, the critical thickness of insulation, and fins: governing equations, efficiency and effectiveness.

    Examined in the 60-mark end-semester paper

    • Steady conduction through plane walls
    • Conduction through cylinders and spheres
    • Thermal resistance networks and overall coefficient
    • Critical radius of insulation
    • Heat transfer from fins
    • Fin efficiency and effectiveness
  2. Unit 2: Convection Heat Transfer

    9 hours

    Hydrodynamic and thermal boundary layers over a plate and in a pipe, forced and natural convection, dimensionless numbers and correlations for laminar and turbulent flow.

    Examined in the 60-mark end-semester paper

    • Convection and boundary layers
    • Dimensionless numbers in convection
    • Forced convection correlations
    • Natural convection
  3. Unit 3: Radiation Heat Transfer

    9 hours

    Laws of radiation, radiative properties, black and grey bodies, view factors and their properties, radiation exchange between grey surfaces and radiation shields.

    Examined in the 60-mark end-semester paper

    • Laws of thermal radiation
    • Radiation properties of surfaces
    • Shape factors
    • Radiation exchange between surfaces
    • Radiation shields
  4. Unit 4: Heat Exchangers

    9 hours

    Classification and temperature distribution in parallel and counter flow, the overall coefficient and fouling, LMTD and NTU–effectiveness rating and sizing, and the design of condensers, reboilers and evaporators.

    Examined in the 60-mark end-semester paper

    • Classification of heat exchangers and fouling
    • LMTD method
    • Effectiveness–NTU method
    • Condenser design
    • Evaporator design
  5. Unit 5: Boiling and Condensation

    9 hours

    Phase-change heat transfer: the pool boiling curve and regimes, flow boiling, and film and dropwise condensation.

    Examined in the 60-mark end-semester paper

    • Boiling heat transfer
    • Condensation heat transfer

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).