KBCNMU TY Civil syllabus

KBCNMU · Third Year B.E. Civil Engineering · NEP 2020

Hydraulic Engineering

CE-606 B · Program Elective III · Semester VI · 3 credits · ISE 40 + ESE 60

One of the Program Elective III options. The course page prints no option code; B follows the scheme's elective list.

  1. Unit 1: Boundary Layer and Flow Around Bodies

    9 hours

    Boundary-layer thicknesses, laminar and turbulent boundary layers on a flat plate, the laminar sub-layer, friction coefficients, separation and its control; drag and lift, circulation, the Magnus effect and aerofoils.

    Examined in the 60-mark end-semester paper

    • Boundary layer theory and separation
    • Drag and lift
  2. Unit 2: Open Channel Flow

    9 hours

    Channel geometry and classification, uniform flow by Chezy and Manning, most economical sections, specific energy and critical depth, the venturi flume, gradually varied flow and surface profiles, and the hydraulic jump.

    Examined in the 60-mark end-semester paper

    • Open channel flow and its classification
    • Uniform flow: Chezy's and Manning's formulae
    • Most economical channel sections
    • Specific energy and critical depth
    • Gradually varied flow equation
    • Classification of water surface profiles
    • Hydraulic jump in rectangular channels
  3. Unit 3: Impact of Jets and Hydraulic Turbines

    9 hours

    Impact of jets on fixed and moving flat and curved surfaces, Euler's turbomachine equation, hydroelectric plants, unit and specific quantities, classification, heads and efficiencies of turbines, and Pelton wheel design.

    Examined in the 60-mark end-semester paper

    • Impact of jet on flat plates
    • Impact of jet on curved vanes
    • Hydroelectric power plant layout
    • Pelton wheel
  4. Unit 4: Pumps

    9 hours

    Classification of centrifugal pumps, specific speed and priming, work done, heads and efficiencies, characteristic curves of turbines and pumps, and the reciprocating pump.

    Examined in the 60-mark end-semester paper

    • Centrifugal pump: construction and working
    • Heads, work done and efficiencies
    • Pump characteristics and multistage pumps
    • Reciprocating pumps
  5. Unit 5: Orifices, Mouthpieces, Notches and Weirs

    9 hours

    Orifice coefficients, small and large orifices, mouthpieces, and rectangular, triangular, trapezoidal and Cipolletti notches and weirs with their discharge formulae and corrections.

    Examined in the 60-mark end-semester paper

    • Orifices and mouthpieces
    • Notches and weirs

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).