KBCNMU TY Civil syllabus

KBCNMU · Third Year B.E. Civil Engineering · NEP 2020

Design of Steel Structure

CE-608 · Semester VI · 2 credits · ISE 40 + ESE 60

Multidisciplinary minor fixed for Civil students: 2 credits, still examined 40 + 60 in a 3-hour paper.

  1. Unit 1: Introduction and Connections

    6 hours

    Types of steel structures, grades and rolled sections, limit state design for strength and serviceability, partial safety factors and load combinations, and bolted and welded connections under axial force and moment.

    Examined in the 60-mark end-semester paper

    • Steel structures, sections and IS codes
    • Limit state design and load combinations
    • Bolted and welded connections to IS 800:2007
    • Eccentric connections
  2. Unit 2: Tension and Compression Members

    6 hours

    Tension members: yielding, net-section rupture and block shear, single and double angles with bolted and welded ends; compression members: effective length, slenderness, local and torsional buckling, section classes and buckling curves.

    Examined in the 60-mark end-semester paper

    • Tension members: yielding, rupture and block shear
    • Design of tension members and connections
    • Buckling and design compressive stress
    • Classification of cross-sections
    • Design of angle struts
  3. Unit 3: Design of Beams

    6 hours

    Lateral stability, built-up beams, bending and bearing stress, web buckling and crippling, laterally supported and unsupported beams, purlins, and castellated beams for bending and shear.

    Examined in the 60-mark end-semester paper

    • Design bending strength of beams
    • Laterally restrained beams
    • Laterally unrestrained beams
    • Web buckling, web crippling and deflection
    • Design of purlins
    • Castellated beams
  4. Unit 4: Lacing and Battening

    6 hours

    Purpose and types of lacing, bar inclination, forces and design; battened columns, batten plates and their spacing and detailing to IS 800:2007.

    Examined in the 60-mark end-semester paper

    • Built-up columns: lacing and battening
  5. Unit 5: Column Bases

    6 hours

    Slab base: plate area, bearing pressure, thickness and anchor bolts; gusseted base: plates, angles, load transfer, base plate and anchor bolt design and detailing.

    Examined in the 60-mark end-semester paper

    • Slab base
    • Gusseted base

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).