KBCNMU SY Mechanical syllabus

KBCNMU · Second Year B.E. Mechanical Engineering · NEP 2020

Fluid Mechanics & Hydraulic Machines

ME-403 · Semester IV · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Fluid Properties and Fluid Statics

    9 hours

    Density, viscosity and surface tension, types of fluids, pressure variation and Pascal's law, hydrostatic forces on vertical and inclined surfaces, the centre of pressure, buoyancy and the stability of floating bodies.

    Examined in the 60-mark end-semester paper

    • Properties of fluids
    • Viscosity and types of fluids
    • Surface tension and capillarity
    • Pascal's law and the hydrostatic law
    • Forces on submerged plane and curved surfaces
    • Buoyancy and stability of floating bodies
  2. Unit 2: Fluid Kinematics and Dynamics

    9 hours

    Types of flow, streamlines, path lines and streak lines, the continuity equation, Euler's and Bernoulli's equations, and the venturimeter, orifice meter and pitot tube.

    Examined in the 60-mark end-semester paper

    • Types of flow and flow description
    • Continuity equation
    • Euler's equation and Bernoulli's theorem
    • Venturimeter, orifice meter and pitot tube
  3. Unit 3: Viscous Flow and Dimensional Analysis

    9 hours

    Laminar and turbulent pipe flow, the Hagen–Poiseuille and Darcy–Weisbach equations, major and minor losses, and dimensional analysis and similitude with Buckingham's π theorem.

    Examined in the 60-mark end-semester paper

    • Laminar flow through pipes
    • Turbulent flow in pipes
    • Major and minor losses and the Moody chart
    • Buckingham's π theorem
    • Dimensionless numbers
    • Similitude and model laws
  4. Unit 4: Hydraulic Turbines

    9 hours

    The impulse–momentum principle and impact of jets, impulse and reaction turbines, the Pelton wheel, Francis and Kaplan turbines with velocity triangles and efficiencies, draft tubes, cavitation and turbine characteristics.

    Examined in the 60-mark end-semester paper

    • Impact of jets on plates and vanes
    • Pelton wheel design
    • Francis and Kaplan turbine design
    • Draft tubes and turbine characteristics
  5. Unit 5: Hydraulic Pumps and Systems

    9 hours

    Centrifugal pumps: components, velocity triangles and characteristics; the reciprocating pump; and the hydraulic accumulator, intensifier, press and fluid coupling.

    Examined in the 60-mark end-semester paper

    • Centrifugal pumps: heads, efficiencies and minimum starting speed
    • NPSH and cavitation in pumps
    • Reciprocating and rotary positive-displacement pumps
    • Accumulators and intensifiers

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).