KBCNMU SY E&TC syllabus

KBCNMU · Second Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Analog Circuits

EC-401 · Semester IV · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Feedback Amplifiers

    9 hours

    The general feedback concept and the relation between the gain with feedback and without it; analysing negative-feedback amplifiers in the four feedback topologies.

    Examined in the 60-mark end-semester paper

    • Feedback topologies and their effects
    • Voltage-series and current-series feedback amplifiers
  2. Unit 2: Oscillators and Multivibrators (BJT)

    9 hours

    The Barkhausen criterion; RC phase-shift, Hartley, Colpitts and Clapp oscillators (frequency of oscillation); BJT astable and monostable multivibrators.

    Examined in the 60-mark end-semester paper

    • Barkhausen criterion and types of oscillators
    • RC phase-shift oscillator
    • Hartley and Colpitts oscillators
    • Astable and monostable multivibrators
  3. Unit 3: Tuned and Power Amplifiers

    9 hours

    The BJT tuned amplifier; the class AB power amplifier, crossover distortion and its elimination, power and efficiency; the hybrid-π model of the BJT and the short-circuit current gain.

    Examined in the 60-mark end-semester paper

    • Tuned amplifiers, neutralisation and unilateralisation
    • Class B push-pull and complementary symmetry amplifiers
    • Efficiency and power dissipation of power amplifiers
    • Hybrid-pi model and CE amplifier analysis
  4. Unit 4: Operational Amplifiers

    9 hours

    The basic difference amplifier, differential and common-mode gain and CMRR; the emitter-coupled differential amplifier; op-amp inverting and non-inverting amplifiers, adder, subtractor, instrumentation amplifier and Schmitt trigger.

    Examined in the 60-mark end-semester paper

    • Differential amplifiers, current sources and level shifting
    • Difference amplifier, virtual short and negative feedback
    • Inverting and non-inverting amplifiers
    • Voltage follower, summing and differential amplifiers
    • Instrumentation amplifier
    • Comparators and the Schmitt trigger
  5. Unit 5: Filters

    9 hours

    Passive filters, and first- and second-order Butterworth low-pass and high-pass active filters using op-amps, with their design.

    Examined in the 60-mark end-semester paper

    • First and second-order active filters
    • Notch and all-pass filters

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).