Electronics & Telecommunication (University) is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Electronics & Telecommunication (University)

RF Design

RF filter design, microwave amplifier design, microwave oscillators, microwave mixers, EMI in RF circuits, electromagnetic compatibility.

Interview questions
Notes for RF Design are being written and reviewed. Until they're up, Aria teaches every topic — ask for any part of the syllabus, with worked numericals.

Coming next in RF Design

  1. Periodic structures· notes coming
  2. Filter design by the image parameter method· notes coming
  3. Insertion loss filter design· notes coming
  4. Filter transformation and implementation· notes coming
  5. Two-port power gains and stability· notes coming
  6. Amplifier design for maximum and specified gain· notes coming
  7. Low-noise amplifier design· notes coming
  8. Class A power amplifier design· notes coming
  9. One-port microwave oscillators· notes coming
  10. Phase noise in oscillators· notes coming
  11. Mixer characteristics· notes coming
  12. Diode, FET, balanced and image-reject mixers· notes coming
  13. Sources of EMI· notes coming
  14. EMI coupling modes· notes coming
  15. Grounding, bonding and shielding· notes coming
  16. EMI measurement instruments· notes coming
  17. EMC standards: MIL-STD, FCC and CISPR· notes coming
  18. RF behaviour of passive components· notes coming
  19. Chip and surface-mount components· notes coming
  20. Open-circuit time-constant method· notes coming
  21. Short-circuit time-constant method· notes coming
  22. Rise time and bandwidth of cascaded systems· notes coming
  23. Shunt-peaked amplifiers and bandwidth enhancement· notes coming
  24. Tuned amplifiers, neutralisation and unilateralisation· notes coming
  25. MOSFET two-port noise parameters· notes coming
  26. Power-constrained noise optimisation· notes coming
  27. Linearity and spurious-free dynamic range· notes coming
  28. Describing functions and the Colpitts oscillator· notes coming
  29. Resonators, crystal and negative-resistance oscillators· notes coming
  30. Multiplier-based and double-balanced mixers· notes coming
  31. EMC regulations and the benefits of EMC design· notes coming
  32. Conducted emission and the LISN· notes coming
  33. Common- and differential-mode currents and power-supply filters· notes coming
  34. Radiated emission models for wires and PCB lands· notes coming
  35. Shielding effectiveness: near and far field· notes coming
  36. PCB and system design for EMC· notes coming