GUG TY Mechanical syllabus

GUG · Third Year B.Tech. Mechanical Engineering · NEP 2020

Heat Transfer

STPCCMEC503 · Semester V · 4 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Conduction

    9 hours

    Modes and laws of heat transfer; the general conduction equation in Cartesian, cylindrical and spherical coordinates; thermal conductivity and diffusivity; one-dimensional steady conduction in plane walls, cylinders and spheres; thermal resistance of composite structures, contact resistance, the overall coefficient and the critical thickness of insulation.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Modes of heat transfer and their laws
    • General heat conduction equation
    • Steady conduction through plane walls
    • Conduction through cylinders and spheres
    • Thermal resistance networks and overall coefficient
    • Critical radius of insulation
  2. Unit 2: Fins and Unsteady Conduction

    9 hours

    Types of fins; fins of uniform cross-section, temperature distribution and heat transfer, fin efficiency and effectiveness; error in temperature measurement; unsteady conduction, lumped heat capacity analysis, the Biot and Fourier numbers.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Heat transfer from fins
    • Fin efficiency and effectiveness
    • Lumped heat capacity analysis
    • Biot and Fourier numbers and Heisler charts
  3. Unit 3: Convection, Boiling and Condensation

    9 hours

    Non-dimensional parameters, velocity and thermal boundary layers; laminar and turbulent forced convection over flat plates, through tubes and over cylinders and spheres; free convection from vertical and horizontal plates and cylinders, spheres and enclosures; pool boiling and its regimes; film and dropwise condensation on vertical surfaces and horizontal tubes; the heat pipe.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Convection and boundary layers
    • Dimensionless numbers in convection
    • Forced convection correlations
    • Natural convection
    • Boiling heat transfer
    • Condensation heat transfer
    • Heat pipes
  4. Unit 4: Thermal Radiation

    9 hours

    Surface emission properties: absorptivity, transmissivity and reflectivity; black-body radiation and intensity; Kirchhoff's, Planck's, Wien's, Stefan-Boltzmann and Lambert's cosine laws; emissivity and emissive power; shape factor algebra, exchange between non-black bodies, radiation shields.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Laws of thermal radiation
    • Radiation properties of surfaces
    • Shape factors
    • Radiation exchange between surfaces
    • Radiation shields
  5. Unit 5: Heat Exchangers

    9 hours

    Classification; the LMTD method for parallel and counter flow, the overall coefficient and fouling factor; the effectiveness-NTU method and design aspects; compact heat exchangers.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification of heat exchangers and fouling
    • LMTD method
    • Effectiveness–NTU method
    • Compact and finned-tube heat exchangers

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.