GUG TY Mechanical syllabus

GUG · Third Year B.Tech. Mechanical Engineering · NEP 2020

Design of Machine Elements

STPCCMEC505 · Semester V · 4 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Design Fundamentals, Fatigue, Cotter and Knuckle Joints

    9 hours

    Types of design, the design process and manufacturing considerations; material properties, standards and selection; factor of safety, theories and modes of failure, compound stresses and eccentric axial loading; variable stresses, stress concentration and its reduction; the Goodman, Soderberg and Gerber criteria and design for finite and infinite life; design of cotter and knuckle joints.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • The machine design process
    • Material selection and factor of safety
    • Theories of failure in design
    • Eccentrically loaded components
    • Stress concentration
    • Fatigue, S–N curve and endurance limit
    • Soderberg, Goodman and Gerber criteria
    • Finite life and cumulative damage
    • Cotter and knuckle joints
  2. Unit 2: Design of Shafts

    9 hours

    Types, materials and functions of shafts; solid and hollow shafts designed for strength and rigidity; power, torque and angle of twist; combined bending and torsion through equivalent moments; fluctuating loads, fatigue and shock factors; maximum shear stress and distortion energy theories; the ASME code.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Design of shafts for strength
    • Design of shafts for rigidity and the ASME code
  3. Unit 3: Welded, Bolted and Riveted Joints

    9 hours

    Transverse, parallel, combined fillet and butt welds and eccentrically loaded welded joints; bolted fasteners, bolts of uniform strength and eccentrically loaded bolted joints; riveted joints, their failure by tearing, shearing and crushing, and riveted joints for boiler shells.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Strength of welded joints
    • Eccentrically loaded welded joints
    • Threaded fasteners and bolts of uniform strength
    • Eccentrically loaded bolted joints
    • Design of riveted joints, including eccentric loading
  4. Unit 4: Power Screws and Springs

    9 hours

    Power screws, thread forms, torque to raise and lower loads, efficiency and self-locking; design of screw, nut and collar; types of springs, stress and deflection of close-coiled helical springs, compression and tension springs, spring index, Wahl's factor and fatigue.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Power screw terminology and torque
    • Efficiency and self-locking
    • Design of a screw jack
    • Design of helical springs
  5. Unit 5: Pressure Vessels and Levers

    9 hours

    Thin and thick cylindrical pressure vessels under internal pressure, circumferential and longitudinal stresses, design of the vessel, heads and cover plates; hand, foot and bell-crank levers.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Thin and thick cylinders
    • End closures and opening compensation
    • Design of levers

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.