GUG · Third Year B.Tech. Mechanical Engineering · NEP 2020
Automobile Engineering
STPECMEC606A · Program Elective III · Semester VI · 3 credits · IE 10 + mid-semester 10 + ESE 80
One of the Program Elective III options.
Unit 1: Automobile Layout and Chassis
9 hoursHistory, definition and classification of automobiles and vehicle specifications; layouts of conventional and electric vehicles (FEFWD, REFWD, FERWD, RERWD, 2WD, 4WD); major components; chassis, frames, sub-frames and frameless construction, chassis and body materials; safety features; engine construction and recent developments.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Power flow layouts
- EV configurations
- Chassis and body structures
- Active and passive vehicle safety
Unit 2: Clutch and Gear Box
9 hoursRequirements and types of clutches: cone, single-plate, multi-plate, semi-centrifugal, centrifugal and wet clutches, their components, adjustment, overhaul and troubleshooting, the fluid flywheel; manual sliding-mesh, constant-mesh and synchromesh gearboxes, selector mechanisms and transfer boxes; epicyclic gearboxes, freewheels, overdrives, torque converters and CVTs.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Clutches and fluid flywheel
- Friction clutches
- Gearboxes and automatic transmissions
Unit 3: Drive Line and Brakes
9 hoursPropeller shafts and universal, Hooke's and constant-velocity joints; final drive and differential; rear axles, Hotchkiss and torque-tube drives; braking requirements, efficiency, stopping distance, fade, weight transfer and skidding; mechanical, hydraulic, pneumatic, electric, servo, exhaust and air brakes, ABS, drum and disc brakes.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Universal and CV joints
- Propeller shaft design
- Final drive and differential
- Rear axle types
- Hotchkiss drive and torque tube drive
- Brake efficiency and stopping distance
- Hydraulic and air brakes
- Anti-lock braking systems
Unit 4: Front Axle, Steering, Wheels, Tyres and Suspension
9 hoursFront axles and wheel alignment; steering geometry: camber, king-pin inclination, scrub radius, castor and toe; steering mechanisms, cornering, understeer and oversteer, steering gears and power steering; wheels and tyres; leaf, coil, torsion-bar and rubber springs, shock absorbers, independent, air and hydro-elastic suspension.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Front stub axles
- Steering geometry and wheel alignment
- Steering gears and power steering
- Wheels and tyres
- Independent suspension systems
- Shock absorbers
- Active and air suspension
Unit 5: Batteries and Electrical Systems
9 hoursLead-acid, alkaline and zinc-air batteries, ratings, charging, testing and maintenance; generators, regulators and alternators; starting motors and drives (Bendix, overrunning clutch, Dyer); lighting circuits; horns, wipers, instruments, air conditioning and central locking.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Automotive batteries and charging
- Starting systems
- Automotive lighting and wiring
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.