GUG SY Mechanical syllabus

GUG · Second Year B.Tech. Mechanical Engineering · NEP 2020

Fluid Mechanics and Machines

STPCCMEC305 · Semester III · 3 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Fluid Properties and Fluid Statics

    8 hours

    Properties and types of fluids, Newton's law of viscosity, surface tension and capillarity; Pascal's and the hydrostatic law; pressure measurement with simple and differential manometers; forces on submerged plane surfaces.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Properties of fluids
    • Viscosity and types of fluids
    • Surface tension and capillarity
    • Pascal's law and the hydrostatic law
    • Pressure measurement and manometers
    • Forces on submerged plane and curved surfaces
  2. Unit 2: Buoyancy, Fluid Kinematics and Dynamics

    8 hours

    Buoyancy, centre of buoyancy, metacentre and metacentric height, stability of floating and submerged bodies; types of flow, path lines, streamlines, stream tubes and streak lines, the continuity equation; Euler's equation of motion and Bernoulli's equation and its applications.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Buoyancy and stability of floating bodies
    • Types of flow and flow description
    • Continuity equation
    • Euler's equation and Bernoulli's theorem
  3. Unit 3: Flow Through Pipes and Reciprocating Pumps

    8 hours

    Reynolds' experiment and turbulent flow, frictional loss in pipes; losses in pipes and fittings, hydraulic gradient and total energy lines, pipes in series, parallel and branched; reciprocating pumps: types, components, slip, work done, theoretical and actual indicator diagrams.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Turbulent flow in pipes
    • Major and minor losses and the Moody chart
    • Hydraulic gradient and energy lines
    • Pipes in series and parallel and equivalent pipe
    • Reciprocating and rotary positive-displacement pumps
  4. Unit 4: Impact of Jets and Turbines

    8 hours

    The impulse-momentum principle; jets on fixed and moving flat plates and curved vanes; the Pelton turbine: principle, construction, velocity diagrams, working proportions and design; cavitation and governing; introduction to reaction turbines.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Momentum equation and forces on pipe bends
    • Impact of jets on plates and vanes
    • Pelton wheel design
    • Draft tubes, governing and cavitation
    • Francis and Kaplan turbine design
  5. Unit 5: Centrifugal Pumps

    8 hours

    Classification and applications, operation and priming; the fundamental equation, heads, velocity triangles, slip factor and vane shape; losses and efficiencies, multistaging, design considerations, NPSH, cavitation and performance characteristics.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Components and working of centrifugal pumps
    • Centrifugal pumps: heads, efficiencies and minimum starting speed
    • Velocity triangles of pumps
    • Multistage centrifugal pumps
    • NPSH and cavitation in pumps

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.