DBATU TY Mechanical syllabus

DBATU · Third Year B.Tech Mechanical Engineering · NEP 2020

Production Processes II

Semester V · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: Mechanics of Metal Cutting

    Single-point tool geometry; chip formation; cutting forces and their measurement; specific cutting energy, ploughing force and the size effect; shear angle theories of Merchant and Lee–Shaffer; friction in cutting.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Single-point cutting tool geometry
    • Chip formation and types of chips
    • Orthogonal and oblique cutting
    • Merchant's theory and cutting forces
  2. Unit 2: Thermal Aspects, Tool Wear and Machinability

    Heat generation and temperature distribution in cutting and its measurement; crater and flank wear and tool-life criteria; HSS, carbide, ceramic, CBN and diamond tools and coatings; machinability and cutting fluids.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Cutting temperature and its measurement
    • Tool wear and Taylor's tool life equation
    • Cutting tool materials and tool signature
    • Machinability and cutting fluids
  3. Unit 3: Abrasive Machining and Finishing Operations

    Abrasives, bonds, grade and structure of grinding wheels; grinding forces, energy and temperature; wheel wear, grinding ratio, dressing and truing; wheel selection; grinding machines; honing, lapping and superfinishing.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Grinding wheels: designation and selection
    • Grinding machines and processes
    • Honing and lapping
  4. Unit 4: Processing of Powder Metals

    Producing metal powders; particle size, shape and blending; compaction and isostatic pressing; sintering; secondary and finishing operations.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Powder metallurgy: compaction and sintering
    • Production of metal powders
  5. Unit 5: Processing of Polymers

    Polymer extrusion and fibre production; injection and reaction-injection moulding; blow, rotational, compression and transfer moulding; thermoforming; processing elastomers.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Polymer moulding processes

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).