DBATU · Third Year B.Tech Electrical Engineering · NEP 2020
Robotics and Automation Engineering
26AF1293PE605D · Elective III · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
One of the Elective III options.
Unit 1: Introduction to Robotics
6 hoursHistory of robots; links, joints and degrees of freedom; Cartesian, cylindrical, spherical, SCARA and articulated robots; grippers and tools; work envelope, resolution, accuracy and repeatability.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Robot components and specifications
- Robot configurations
- Robot grippers
- Resolution, accuracy and repeatability
Unit 2: Robot Kinematics and Dynamics
6 hoursRotation matrices and homogeneous coordinates; D–H representation; forward and inverse kinematics of 2R and 3R arms; the Jacobian, singularities and statics; Euler–Lagrange and Newton–Euler dynamics.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Rotation matrices
- Homogeneous transformations
- Denavit-Hartenberg representation
- Inverse kinematics
- Manipulator Jacobian and singularities
- Robot dynamics by Lagrange's equation
Unit 3: Sensors and Actuators
6 hoursDC servo, stepper and BLDC motors; hydraulic and pneumatic actuators; encoders, resolvers and tachometers; proximity, ultrasonic and force/torque sensors; machine-vision basics.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Robot drives and actuators
- Position sensors and encoders
- Range, touch and force sensors
- Machine vision: acquisition and processing
Unit 4: Robot Control and Motion Planning
6 hoursJoint-space versus task-space control; cubic, quintic and LSPB trajectories; P, PI and PID joint control; obstacle avoidance and path planning.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Joint space and task space control
- Trajectory profiles
- Robot joint control
- Obstacle avoidance and path planning
Unit 5: Industrial Automation and PLCs
6 hoursSensors, actuators and controllers in industrial automation; PLC architecture, I/O modules and scan cycle; ladder logic, instruction list and function blocks; case studies in material handling, assembly and SCADA.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Industrial control systems
- PLC scan cycle and I/O modules
- Ladder logic, instruction list and function blocks
- Industrial robot applications
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).