DBATU TY Electrical syllabus

DBATU · Third Year B.Tech Electrical Engineering · NEP 2020

Electrical Machine Design

26AF1293PC602 · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

All notes for this subject
  1. Unit 1: Principles of Electrical Machine Design

    6 hours

    Principles, design factors and limitations; ratings, specifications and standards; magnetic, electric and dielectric materials; approaches to computer-aided design.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Principles, factors and limitations of machine design
    • Electrical engineering materials and space factor
    • Computer-aided machine design approaches
  2. Unit 2: Design of Transformers

    6 hours

    Distribution and power transformers: types and specifications; main dimensions of core, yoke, windings and tank with and without cooling tubes; leakage reactance, winding resistance, no-load current and losses; short-circuit forces and their reduction.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Transformer construction and specifications
    • Output equation of a transformer
    • Design of the core and frame
    • Design of transformer windings
    • Cooling and tank design
    • Leakage reactance of transformers
    • No-load current and losses of transformers
    • Short-circuit forces
  3. Unit 3: Design of Simple Apparatus; AC and DC Windings

    8 hours

    Design of heating coils, starters, chokes and lifting magnets; types of AC windings; simplex and duplex lap and wave windings; multiplex windings; single- and double-layer three-phase mush windings with integral slots.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Design of heating coils and chokes
    • Design of starters and lifting magnets
    • Lap and wave windings for DC machines
    • Three-phase AC windings
  4. Unit 4: Design of Induction Motors

    6 hours

    Ampere-turns for the magnetic circuit; output equation and specific loadings; turns per phase, stator slots and main dimensions; air-gap length; unbalanced magnetic pull and harmonic fields; squirrel-cage and wound-rotor design.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Ampere-turn calculation for magnetic circuits
    • Output equation of an induction motor
    • Specific electric and magnetic loadings
    • Main dimensions and stator design
    • Air gap length
    • Unbalanced magnetic pull
    • Cage rotor design
    • Wound rotor design
  5. Unit 5: Heating and Ventilation of Electrical Machines

    6 hours

    Heat generation; temperature rise and heat dissipation; heating and cooling cycles and time constants; cooling and ventilation methods; thermal resistance and coolant quantity.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Temperature rise and rating of machines
    • Heating and cooling time constants
    • Methods of cooling and ventilation

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).