DBATU · Second Year B.Tech Mechanical Engineering · NEP 2020
Fluid Mechanics
25AF1612PC402 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Fluid Properties and Fluid Statics
Fluid as a continuum; viscosity and types of fluid; compressibility, surface tension, capillarity and vapour pressure; Pascal's and the hydrostatic law; total pressure and centre of pressure; buoyancy, metacentre and stability (no numericals on statics).
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Properties of fluids
- Viscosity and types of fluids
- Surface tension and capillarity
- Pascal's law and the hydrostatic law
- Forces on submerged plane and curved surfaces
- Buoyancy and stability of floating bodies
Unit 2: Fluid Kinematics and Dynamics
Eulerian and Lagrangian descriptions; types of flow; streamlines, streaklines and pathlines; velocity potential, stream function and flow nets; continuity; Euler's and Bernoulli's equations; pitot tube, venturimeter and orifice meter.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Types of flow and flow description
- Stream function, velocity potential and flow nets
- Continuity equation
- Euler's equation and Bernoulli's theorem
- Venturimeter, orifice meter and pitot tube
Unit 3: Laminar Flow and Turbulent Flow
Viscous flow through circular pipes and between parallel plates; Darcy and Chezy friction losses; minor losses; HGL and TEL; siphons; pipes in series, parallel and branched; power transmission; the Moody diagram.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Laminar flow through pipes
- Laminar flow between parallel plates and Couette flow
- Major and minor losses and the Moody chart
- Pipes in series and parallel and equivalent pipe
- Siphons and power transmission through pipes
Unit 4: Forces on Immersed Bodies and Boundary Layer Theory
Lift and drag; drag on a flat plate and an aerofoil; the Magnus effect and stalling; boundary-layer thickness, laminar and turbulent layers, separation and its control.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Drag and lift
- Boundary layer on a flat plate
- Boundary layer thicknesses
- Boundary layer separation and its control
Unit 5: Dimensional Analysis
Dimensional homogeneity; Rayleigh's method and Buckingham's π theorem; dimensionless numbers (no numerical treatment).
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Dimensional homogeneity
- Buckingham's π theorem
- Dimensionless numbers
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).