DBATU SY Civil syllabus

DBATU · Second Year B.Tech Civil Engineering · NEP 2020

Concrete Technology

25AF1191PC402 · Semester IV · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

All notes for this subject
  1. Unit 1: Ingredients of Concrete

    6 hours

    Cement: manufacture, physical properties, hydration, compounds and types; aggregates: classification, physical and mechanical properties, grading by sieve analysis and tests; quality of mixing water.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Cement: manufacture, types and hydration
    • Aggregates and their properties
    • Quality of water for concrete
  2. Unit 2: Properties of Fresh Concrete

    6 hours

    Nominal mixes; batching, mixing, transport, placing, pumping and compaction; workability and its measurement; segregation and bleeding; setting time; curing methods; temperature effects on fresh concrete.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Batching, mixing, placing and curing
    • Workability and its tests
    • Segregation and bleeding
  3. Unit 3: Properties of Hardened Concrete

    6 hours

    Characteristic, compressive, tensile and flexural strength; stress–strain behaviour and modulus of elasticity; effects of w/c ratio and admixtures; creep and shrinkage; durability, exposure conditions and cracking; sulphate attack and alkali–aggregate reaction.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Strength of hardened concrete
    • Creep and shrinkage of concrete
    • Durability: sulphate attack and alkali–silica reaction
  4. Unit 4: Admixtures and Special Concretes

    6 hours

    Accelerators, retarders, plasticisers and superplasticisers; fly ash, silica fume and GGBS; lightweight, self-compacting, high-density, fibre-reinforced, high-strength, high-performance and geopolymer concrete; ferrocement.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Admixtures and fibres
    • Mineral admixtures: fly ash, silica fume and GGBS
    • High-performance and self-compacting concrete
    • Lightweight, pervious and high-density concrete
    • Fibre-reinforced concrete
    • Geopolymer concrete and ferrocement
  5. Unit 5: Concrete Mix Design

    6 hours

    Factors governing mix design and its methods; expressing proportions; trial mixes and acceptance criteria; variation and quality control in concrete construction; rebound hammer and ultrasonic pulse velocity tests.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Principles of mix design
    • IS 10262 mix design method
    • Quality control and acceptance criteria
    • Non-destructive testing of concrete

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).