DBATU · Final Year B.Tech Mechanical Engineering · Non-NEP
Advanced IC Engines
BTMPE703D · Elective I · Semester VII · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
One of the Elective I options.
Unit 1: Spark Ignition Engines
7 hoursMixture requirements; monopoint, multipoint and direct fuel injection; stages of normal and abnormal combustion; knock and the factors affecting it; combustion chambers.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Fuel injection in SI and CI engines
- Multipoint and direct injection in SI engines
- Combustion in SI engines and knock
- Combustion chambers
Unit 2: Compression Ignition Engines
7 hoursDiesel fuel injection systems; stages of combustion and knock; direct and indirect injection and combustion chambers; spray behaviour, structure and penetration; air motion; turbocharging.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Combustion in CI engines and knock
- Diesel spray behaviour, penetration and air motion
- Supercharging and turbocharging
Unit 3: Pollutant Formation and Control
7 hoursFormation of CO, unburnt hydrocarbons, NOx, smoke and particulates; controlling emissions with catalytic converters, selective catalytic reduction and particulate traps; measurement, emission norms and driving cycles.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Pollutant formation: CO, HC, NOx and particulates
- Catalytic converters, SCR and particulate traps
- Emission measurement, norms and driving cycles
Unit 4: Alternative Fuels and Multi-fuel Engines
7 hoursAlcohol, hydrogen, CNG, LPG and biodiesel: properties, suitability and engine modifications; multi-fuel engines, HCCI, GDI and exhaust after-treatment.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Alternative fuels and fuel ratings
- Biodiesel and transesterification
- Multi-fuel engines and HCCI
Unit 5: Recent Trends
7 hoursAir-assisted combustion, HCCI engines, variable-geometry turbochargers, common rail direct injection, hybrid electric vehicles, NOx adsorbers and on-board diagnostics.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- CRDI and variable geometry turbochargers
- Electric and hybrid vehicle layouts
- On-board diagnostics and NOx adsorbers
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).