DBATU Final Year Electrical syllabus

DBATU · Final Year B.Tech Electrical Engineering · Non-NEP

Electrical System Design for Building

BTEEPE703B · Elective I · Semester VII · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective I options.

All notes for this subject
  1. Unit 1: System Planning

    7 hours

    Estimating material for wiring a house from its electrical layout; circuit drawing; conductor sizing for domestic wiring; permissible voltage drops for lighting and industrial loads; sizing underground cables.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Estimating material for house wiring
    • Conductor sizing for internal domestic wiring
    • Permissible voltage drop for lighting and industrial loads
    • Cable selection and sizing
  2. Unit 2: Components of the Electrical Distribution System

    8 hours

    Types of insulated wires; splicing and wire joints; types of switches; ceiling roses, sockets and plugs; main switches, distribution fuse boards and MCBs.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Types of insulated wires
    • Wire joints and terminations
    • Switches, sockets and distribution fuse boards
    • Miniature circuit breakers
  3. Unit 3: Cable Size Selection and Substations

    7 hours

    Load calculation; cable types, construction and installation conditions; selecting cables by feeder current rating; design of installations; types of substation, their equipment, and the single-line diagram and estimate of an outdoor substation.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Load estimation: load and diversity factors
    • Cable construction and installation conditions
    • Types of substations and their equipment
    • Outdoor substation single-line diagram and estimate
  4. Unit 4: Protection and Light Sources

    7 hours

    Fuses and protective devices; earthing, soil resistivity and electrodes; single- and three-phase residential installations; bus bars and bus bar chambers; mounting CTs and PTs; incandescent, fluorescent, HID, mercury, metal halide, sodium and induction lamps.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Fuses and protective devices in installations
    • Earthing design
    • Bus bar chambers and mounting of CTs and PTs
    • Types of lamps for buildings
  5. Unit 5: Electrical Planning

    7 hours

    Procedure of wiring planning; computers in electrical design; the architectural electrical plan; residential electrical criteria.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Procedure of wiring planning
    • Electrical drawings and single-line diagrams
    • Computer-aided electrical design for buildings
    • Residential electrical design criteria

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).