BAMU TY Mechanical syllabus

BAMU · Third Year B.E./B.Tech Mechanical Engineering · NEP 2020

Tool Engineering

MED-357-1 · Elective II · Semester VI · 3 credits · CIA 40 + SEE 60

One of the Elective II options.

  1. Module 1: Theory of Metal Cutting and Design of Cutting Tools

    15 hours

    Mechanics of machining, single-point tool geometry, chip formation, orthogonal and oblique cutting, cutting fluids, machinability, tool wear and life; design and nomenclature of drills, milling cutters, reamers, taps and broaches.

    Examined in the 60-mark end-semester paper

    • Mechanics of orthogonal and oblique cutting
    • Tool wear, tool life and machinability
    • Multipoint cutting tools
    • Design of drills, reamers, taps and broaches
  2. Module 2: Design of Jigs, Fixtures and Press Tools

    15 hours

    Location and clamping, drilling jigs, milling fixtures, indexing jigs and automatic clamping; press operations and equipment, die components, strip layout, cutting forces and the design of blanking, piercing, compound and progressive dies.

    Examined in the 60-mark end-semester paper

    • The 3-2-1 principle and location
    • Clamping principles and devices
    • Types of jigs and drill bushes
    • Types of fixtures
    • Press working equipment and die components
    • Strip layout and design of blanking and piercing dies
    • Compound and progressive dies
  3. Module 3: Bending, Forming and Drawing Dies

    15 hours

    Bending terminology, bend allowance and springback, wiping and channel dies, forming and embossing dies; drawing and bulging dies, design considerations, draw speed, blank size and number of draws.

    Examined in the 60-mark end-semester paper

    • Bending dies, bend allowance and springback
    • Forming, embossing and bulging dies
    • Drawing dies: blank size and number of draws

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).