BAMU TY Mechanical syllabus

BAMU · Third Year B.E./B.Tech Mechanical Engineering · NEP 2020

Theory of Machines

MED-303 · Semester V · 3 credits · CIA 40 + SEE 60

  1. Module 1: Introduction; Velocity Analysis

    15 hours

    Kinematic links, pairs and chains, degrees of freedom, slider-crank, double slider-crank and four-bar chains and their inversions; velocity analysis of mechanisms of up to six links by relative velocity and instantaneous centres with Kennedy's theorem.

    Examined in the 60-mark end-semester paper

    • Links, pairs and kinematic chains
    • Degrees of freedom and Grübler's criterion
    • Inversions of the four-bar chain
    • Inversions of slider-crank and double slider-crank chains
    • Velocity analysis by relative velocity
    • Instantaneous centres and Kennedy's theorem
  2. Module 2: Acceleration Analysis; Brakes and Dynamometers; Cams

    15 hours

    Relative acceleration and the Coriolis component, Ritterhaus, Klein's and modified Klein's constructions and analytical analysis of engine mechanisms; shoe, band and band-and-block brakes, braking of vehicles, absorption and transmission dynamometers; cams and followers, follower motions and cam profiles.

    Examined in the 60-mark end-semester paper

    • Acceleration analysis and the Coriolis component
    • Klein's construction
    • Types of brakes
    • Dynamometers: absorption and transmission
    • Types of cams and followers
    • Follower motions: SHM, uniform acceleration and cycloidal
    • Drawing cam profiles
  3. Module 3: Balancing of Rotating Masses; Balancing of Reciprocating Masses

    15 hours

    Balancing a single rotating mass in the same and in different planes and several masses; primary and secondary unbalanced forces, partial balancing of reciprocating engines and locomotives, tractive force variation, swaying couple, hammer blow and balancing of multi-cylinder in-line engines.

    Examined in the 60-mark end-semester paper

    • Balancing of rotating masses
    • Balancing of reciprocating masses
    • Partial balancing of locomotives
    • Balancing of multi-cylinder, V and radial engines

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).