BAMU TY Mechanical syllabus

BAMU · Third Year B.E./B.Tech Mechanical Engineering · NEP 2020

Engineering Metallurgy and Advanced Materials

MED-307 · Semester V · 3 credits · CIA 40 + SEE 60

  1. Module 1: Introduction to Structure of Materials; Phase Diagrams

    15 hours

    Mechanical properties; unit cells, lattices, crystal structures and Miller indices; solidification, nucleation and grain growth; strengthening by grain boundaries, solid solution, fine particles, fibres, martensite and strain hardening and the Bauschinger effect; Gibbs' phase rule, solid solutions and Hume-Rothery's rules, isomorphous, eutectic, eutectoid and peritectic systems, the Fe–C diagram, lever rule and TTT and CCT diagrams.

    Examined in the 60-mark end-semester paper

    • Mechanical properties of materials
    • Crystal structures and Miller indices
    • Nucleation and growth
    • Strengthening mechanisms: grain size, solid solution and particles
    • Cold working and strain hardening
    • Gibbs' phase rule and the lever rule
    • Isomorphous, eutectic and peritectic systems
    • Iron–carbon equilibrium diagram
    • TTT and CCT diagrams
  2. Module 2: Heat Treatment Processes; Steels and Cast Iron

    15 hours

    Annealing, normalising, hardening and the Jominy test, retained austenite and sub-zero treatment, tempering, austempering, martempering and surface and case hardening; classification and designation of steels, carbon and alloy steels, HSLA, maraging, free-cutting and tool steels, stainless steels with sensitisation and weld decay; white, malleable, nodular and grey cast irons.

    Examined in the 60-mark end-semester paper

    • Annealing and normalising
    • Hardening, tempering and hardenability
    • Austempering, martempering and sub-zero treatment
    • Surface hardening
    • Designation of steels: IS, AISI and SAE
    • Plain carbon steels
    • Alloy steels and alloying elements
    • Stainless steels and tool steels
    • Sensitisation and weld decay in stainless steels
    • Cast irons
  3. Module 3: Non-ferrous Alloys; Advanced Materials

    15 hours

    Brasses, bronzes and bearing alloys, aluminium and magnesium alloys; ceramics and glasses; classification, matrices, reinforcements and fabrication of composites; nanomaterials and nanotechnology; Ni- and Co-based superalloys and titanium and zirconium alloys; metallic glasses and rapid solidification.

    Examined in the 60-mark end-semester paper

    • Copper and its alloys
    • Aluminium alloys and age hardening
    • Magnesium alloys
    • Ceramics and glasses
    • Composite materials: matrices, reinforcements and fabrication
    • Nanomaterials and nanotechnology
    • Superalloys and high-temperature materials
    • Metallic glasses and rapid solidification

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).