BAMU · Third Year B.E./B.Tech Mechanical Engineering · NEP 2020
Design of Machine Elements-II
MED-351 · Semester VI · 3 credits · CIA 40 + SEE 60
Module 1: Design of Spur and Helical Gears; Design of Bevel and Worm Gears with Fundamentals of Gear Trains
15 hoursGear design considerations, materials and tooth failure, design of spur and helical gears; worm and bevel gears; introduction to and types of gear trains.
Examined in the 60-mark end-semester paper
- Gear materials and modes of tooth failure
- Design of spur gears
- Design of helical gears
- Straight bevel gears
- Worm gear terminology and force analysis
- Types of gear trains
Module 2: Design of Friction Clutches; Design of Belt Drives
15 hoursSingle-plate, multi-plate, cone and centrifugal clutches; types and materials of belts, design of open and crossed flat belts and V-belts from standard catalogues.
Examined in the 60-mark end-semester paper
- Friction clutches
- Cone and centrifugal clutches
- Design of flat belt drives
- Selecting V-belts from catalogues
Module 3: Design of Wire Rope and Chain Drives; Design of Bearings
15 hoursTypes and materials of wire ropes and chains, design of wire ropes and simple chain drives; hydrodynamic and hydrostatic sliding bearings; static and dynamic capacity of rolling bearings and life under variable load and speed.
Examined in the 60-mark end-semester paper
- Design of wire ropes
- Design of chain drives
- Hydrodynamic sliding bearings
- Static and dynamic load capacity
- Equivalent load and bearing life
Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).