BAMU TY Civil syllabus

BAMU · Third Year B.E./B.Tech Civil Engineering · NEP 2020

Design of Steel Structures

PCCT-3 · Semester V · 3 credits · CIA 40 + SEE 60

  1. Module 1: Introduction and Limit State Design; Bolted and Welded Joints; Tension Members

    15 hours

    Structural steel, Indian standard sections and the IS 800, IS 808 and IS 875 codes; limit state design, partial safety factors, load combinations and classification of cross-sections; design and detailing of bolted and welded joints; tension members, net area and shear lag.

    Examined in the 60-mark end-semester paper

    • Steel structures, sections and IS codes
    • Limit state design and load combinations
    • Classification of cross-sections
    • Bolted and welded connections to IS 800:2007
    • Welded connections and fillet welds
    • Tension members: yielding, rupture and block shear
  2. Module 2: Design of Tension Members; Compression Members and Column Bases

    15 hours

    Design of tension members and their bolted and welded connections with gusset plates and lug angles; buckling classes, effective length, rolled and built-up columns with lacing and battening; slab and gusseted bases.

    Examined in the 60-mark end-semester paper

    • Design of tension members and connections
    • Buckling and design compressive stress
    • Design of axially loaded columns
    • Built-up columns: lacing and battening
    • Slab base
    • Gusseted base
  3. Module 3: Flexural Members; Roof Trusses; Plate and Gantry Girders

    15 hours

    Laterally supported and unsupported beams with and without flange plates and deflection checks, floor beam layouts; industrial roof trusses, their loads and load combinations; plate girders, curtailment of flanges and stiffeners, and gantry girders.

    Examined in the 60-mark end-semester paper

    • Laterally restrained beams
    • Laterally unrestrained beams
    • Web buckling, web crippling and deflection
    • Roof trusses: types, components and loads
    • Design of purlins
    • Welded plate girder: section design
    • Plate girder stiffeners and connections
    • Gantry girder design

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).