BAMU · Second Year B.E./B.Tech Mechanical Engineering · NEP 2020
Machine Drawing
MED 203 · Semester III · 2 credits · CIA 20 + SEE 30
A 2-credit theory course: CIA 20 + SEE 30.
Module 1: Development of Surfaces; Interpenetration of Solids
10 hoursDevelopment of the surfaces of cut prisms, cylinders, pyramids and cones; curves of interpenetration of cylinders, prisms, pyramids, cones and spheres.
Examined in the 30-mark end-semester paper
- Development of lateral surfaces
- Intersection of two cylinders
- Intersection of cones, prisms and cylinders
Module 2: Auxiliary Views; Engineering Curves
10 hoursAuxiliary planes and projection on them, completing regular views from given auxiliary views; ellipse, parabola, hyperbola, involute, cycloid, epicycloid, hypocycloid and helix.
Examined in the 30-mark end-semester paper
- Auxiliary planes and auxiliary views
- Engineering curves: conics, involutes, cycloids and the helix
Module 3: Conventional Representations
10 hoursConventional representation of materials and machine components: nuts and bolts, locking devices, keys, cotter joints, welded and knuckle joints, riveted joints, shaft couplings, bearings and pipe joints.
Examined in the 30-mark end-semester paper
- Conventional representation of materials and machine elements
- Drawing screwed fasteners
- Drawing keys, cotters and pin joints
- Drawing riveted and welded joints
- Drawing shaft couplings
- Drawing bearings and pipe joints
Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).