BAMU SY Mechanical syllabus

BAMU · Second Year B.E./B.Tech Mechanical Engineering · NEP 2020

Fluid Mechanics and Fluid Machines

MED 251 · Semester IV · 3 credits · CIA 40 + SEE 60

  1. Module 1: Basics of Fluid Mechanics and Fluid Statics; Fluid Kinematics

    15 hours

    Fluid properties, ideal and real fluids, manometry, hydrostatic forces on immersed surfaces and their applications; types of fluid motion, velocity and acceleration, streamlines and path lines, continuity equation, circulation and vorticity, velocity potential and stream function.

    Examined in the 60-mark end-semester paper

    • Properties of fluids
    • Pressure measurement and manometers
    • Forces on submerged plane and curved surfaces
    • Types of flow and flow description
    • Continuity equation
    • Circulation and vorticity
    • Stream function, velocity potential and flow nets
  2. Module 2: Fluid Dynamics; Dimensional Analysis; Flow through Pipes

    15 hours

    Euler's and Bernoulli's equations and their applications, the momentum equation and forces on pipe bends; dimensional homogeneity, Buckingham's π theorem and similarity; Darcy–Weisbach equation, major and minor losses, HGL and TEL, series, parallel and branched pipes and equivalent pipes.

    Examined in the 60-mark end-semester paper

    • Euler's equation and Bernoulli's theorem
    • Momentum equation and forces on pipe bends
    • Dimensional homogeneity
    • Buckingham's π theorem
    • Similitude and model laws
    • Major and minor losses and the Moody chart
    • Pipes in series and parallel and equivalent pipe
  3. Module 3: Hydraulic Machines

    15 hours

    Impact of jets on fixed, moving and hinged plates and vanes; classification, working and design of the Pelton wheel and Francis and Kaplan turbines, draft tubes and performance characteristics; centrifugal pumps, casings, manometric head, efficiencies, power, minimum starting speed and multistage pumps.

    Examined in the 60-mark end-semester paper

    • Impact of jets on plates and vanes
    • Pelton wheel design
    • Francis and Kaplan turbine design
    • Draft tubes and turbine characteristics
    • Centrifugal pumps: heads, efficiencies and minimum starting speed
    • Multistage centrifugal pumps

Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).