BAMU · Second Year B.E./B.Tech Civil Engineering · NEP 2020
Concrete Technology
PCCT-1 · Semester IV · 3 credits · CIA 40 + SEE 60
Module 1: Cement and Cementitious Materials; Concrete Mix Proportioning
8 hoursTypes, production, composition, setting and hydration of cement and its standard specifications; cementitious materials; nominal and design mixes and IS mix proportioning of ordinary and standard grades.
Examined in the 60-mark end-semester paper
- Cement: manufacture, types and hydration
- Mineral admixtures: fly ash, silica fume and GGBS
- Principles of mix design
- IS 10262 mix design method
Module 2: Fine and Coarse Aggregates; Water; Special Concrete
10 hoursNatural and manufactured sand, grading, fineness modulus and bulking; coarse aggregate grading and the flakiness, elongation, crushing, impact and abrasion tests; water for concrete; lightweight, high-density, fibre-reinforced, self-compacting and air-entrained concrete.
Examined in the 60-mark end-semester paper
- Aggregates and their properties
- Aggregate tests: crushing, impact and abrasion values
- Quality of water for concrete
- Lightweight, pervious and high-density concrete
- Fibre-reinforced concrete
- High-performance and self-compacting concrete
Module 3: Production of Concrete; Properties of Fresh and Hardened Concrete
12 hoursBatching, mixing, transporting, placing, compaction and curing; cohesion, segregation, bleeding, setting, workability and its measurement, plasticisers and superplasticisers; strength, modulus, Poisson's ratio, permeability and durability, destructive and non-destructive tests.
Examined in the 60-mark end-semester paper
- Batching, mixing, placing and curing
- Workability and its tests
- Segregation and bleeding
- Admixtures and fibres
- Strength of hardened concrete
- Non-destructive testing of concrete
Module contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).