BAMU Final Year Mechanical syllabus

BAMU · Final Year B.E. Mechanical Engineering · CBCS (2019)

Metrology and Quality Control

MED403 · Semester VII · 4 credits · CT 20 + theory 80

  1. Unit 1: Introduction to Metrology; Standards; Comparators

    10 hours

    Metrology and legal metrology; types and sources of error; measurement standards, slip gauges, linear and angular measurement (sine bar, autocollimator, dividing head) and calibration; mechanical, pneumatic, optical, electronic and LVDT comparators.

    Examined in the 80-mark end-semester paper

    • Measurement standards, errors and uncertainty
    • Linear measuring instruments and gauges
    • Angular measurement: sine bar and bevel protractor
    • Comparators
  2. Unit 2: Interferometry and Surface Finish; Design of Gauges

    6 hours

    Interferometers and flatness and parallelism of slip gauges; surface texture and stylus measurement; types of gauges, limits, fits and tolerances, selective assembly, IS 919 and Taylor's principle.

    Examined in the 80-mark end-semester paper

    • Interferometry and flatness testing
    • Surface texture measurement
    • Limits, fits and tolerances
    • Gauge design and Taylor's principle
    • Interchangeability and selective assembly
  3. Unit 3: Screw Thread and Gear Metrology; Advances in Metrology

    4 hours

    Screw thread metrology; gear errors and measurement, gear tooth vernier, profile projector and toolmaker's microscope; CMM, universal measuring machines and lasers in metrology.

    Examined in the 80-mark end-semester paper

    • Screw thread metrology
    • Gear metrology
    • Coordinate measuring machines
    • Optical and non-contact metrology
  4. Unit 4: Introduction to Quality and Quality Tools

    6 hours

    Quality of design, conformance and performance; cost and value of quality; the seven quality tools, brainstorming and quality circles.

    Examined in the 80-mark end-semester paper

    • Quality concepts and cost of quality
    • Seven quality tools
    • Kaizen, 5S, poka-yoke and quality circles
  5. Unit 5: Total Quality Management

    6 hours

    QFD, 5S, kaizen, kanban, JIT, poka-yoke, TPM, FMECA, FTA and zero defects.

    Examined in the 80-mark end-semester paper

    • Total quality management tools: QFD, JIT and TPM
    • Kaizen, 5S, poka-yoke and quality circles
    • FMEA and FMECA
  6. Unit 6: Statistical Quality Control; Acceptance Sampling; ISO 9000

    8 hours

    Basic statistics and the importance of SQC; control charts for variables and attributes; process capability; acceptance sampling, OC curves and sampling methods; ISO 9000, standardisation, codification, variety control and value engineering.

    Examined in the 80-mark end-semester paper

    • Variation and statistical process control
    • Control charts for variables
    • Control charts for attributes
    • Process capability indices
    • Acceptance sampling and OC curves
    • Quality management systems and awards

Unit contents are summarised from the official BAMU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Marathwada University (BAMU).