First Year Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Triple integrals

Triple integrals: definition, geometry of regions in 3D, order of integration, change of variables (cylindrical and spherical), and applications to volume, mass, centre of mass, and moments.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

  • Heat flow, fluid pressure forces, and charge in a volume also reduce to triple integrals of a suitable field over a 3D region.

Key ideas

  • Region (solid): A bounded (finite-volume) solid E ⊂ ℝ³ that is Jordan-measurable (its boundary has measure zero), so volume is well-defined; holes are allowed.
  • Volume element: An infinitesimal “box” in space with volume dV. In Cartesian coordinates, dV = dx·dy·dz.
  • Triple integral: The limit of sums of f times small volumes over a solid E, written ∭_E f(x, y, z) dV. For continuous f on a bounded solid E, the triple integral exists.
  • Fubini’s Theorem (3D): If f is continuous on a rectangular box or E is a solid that can be described with proper bounds, then ∭_E f dV can be evaluated as an iterated integral in any order, e.g., ∫∫∫ f(x, y, z) dz dy dx, with equivalent value provided the bounds match the region E.
  • Type of region by projection:
    • Type z-first: For each (x, y) in a projection R_xy, z varies between z = g₁(x, y) and z = g₂(x, y).
    • Type y-first: For each (x, z) in a projection R_xz, y varies between y = h₁(x, z) and y = h₂(x, z).
    • Type x-first: For each (y, z) in a projection R_yz, x varies between x = k₁(y, z) and x = k₂(y, z). Choosing the “right” type makes the integral simpler.
  • Coordinate changes and Jacobian: When symmetry suggests, switch coordinates.
    • Cylindrical: x = r cosθ, y = r sinθ, z = z, with r ≥ 0, 0 ≤ θ < 2π.
    • Spherical: x = r sinθ cosφ, y = r sinθ sinφ, z = r cosθ, with r ≥ 0, 0 ≤ θ ≤ π (polar from +z), 0 ≤ φ < 2π (azimuth in xy-plane).
    • The Jacobian determinant gives the scale factor between dV and the new differentials.
  • Physical meanings:
    • Volume: V = ∭_E 1 dV (unit: m³).
    • Mass with density ρ(x, y, z): M = ∭_E ρ dV (unit: kg).
    • Centre of mass (x̄, ȳ, z̄): x̄ = (1/M) ∭ xρ dV, ȳ = (1/M) ∭ yρ dV, z̄ = (1/M) ∭ zρ dV (unit: m).
    • Moments of inertia about axes: I_x = ∭ (y² + z²)ρ dV, I_y = ∭ (x² + z²)ρ dV, I_z = ∭ (x² + y²)ρ dV (unit: kg·m²).

Exact statements and common derivations

  • Statement (Triple integral, Riemann definition): Let f be bounded on a closed and bounded solid E ⊂ ℝ³. Partition E into small sub-solids with volumes ΔV_i and sample points (x_i, y_i, z_i). If the limit of Σ f(x_i, y_i, z_i) ΔV_i as the maximum diameter of the partition goes to 0 exists and is independent of the partition and samples, then f is integrable over E and the limit is ∭_E f dV.
  • Statement (Fubini’s Theorem, continuous case): If f is continuous on a closed box B = [a, b]×[c, d]×[e, g], then ∭_B f dV equals each of the six iterated integrals obtained by integrating in any order. For more general E, describe E by inequalities that define proper bounds; continuity and measurability conditions ensure equality.
  • Statement (Change of variables in triple integrals): If T maps (u, v, w) to (x, y, z) with continuous partial derivatives, is one-to-one on a region G with image E, and has Jacobian determinant J_T(u, v, w) ≠ 0 on G (except possibly on a set of measure zero), then for integrable f, ∭_E f(x, y, z) dV = ∭_G f(T(u, v, w)) · |J_T(u, v, w)| du dv dw, where |J_T| is the absolute value of the Jacobian determinant of T.
  • Derivation (Jacobian for cylindrical coordinates): T(r, θ, z) = (r cosθ, r sinθ, z). The Jacobian matrix is [∂x/∂r ∂x/∂θ ∂x/∂z] = [cosθ −r sinθ 0] [∂y/∂r ∂y/∂θ ∂y/∂z] [sinθ r cosθ 0] [∂z/∂r ∂z/∂θ ∂z/∂z] [ 0 0 1] Determinant = r(cos²θ + sin²θ) = r. Hence dV = r dr dθ dz.
  • Derivation (Jacobian for spherical coordinates; engineering convention θ = polar from +z, φ = azimuth): T(r, θ, φ) = (r sinθ cosφ, r sinθ sinφ, r cosθ). The Jacobian determinant is r² sinθ, hence dV = r² sinθ dr dθ dφ.
  • How to sketch exam diagrams (no images here; draw yourself guided by this):
    • For a z-first region: Draw the projection R_xy in the xy-plane, showing boundary curves, then show vertical (parallel to z) arrows indicating z ranges between lower and upper surfaces. Label g₁(x, y) (lower) and g₂(x, y) (upper), and indicate the domain for (x, y).
    • For cylindrical symmetry: Draw the top view (xy-plane) as the projection disk r ≤ R (with boundary r = R determined by the intersection), then draw a vertical section (any plane through z-axis) showing z-limits as curves z = z_lower(r) and z = z_upper(r). Label r, θ, and z clearly.
    • For spherical symmetry: Draw a meridian section (φ fixed) as a circle; indicate r from origin, θ from +z-axis; label limits θ ∈ [θ₁, θ₂], r ∈ [0, R] or between two spheres if annular.

Formulas

∭_E f(x, y, z) dV — Triple integral of scalar field f over solid E; dV is volume element (m³). ∭_E 1 dV = Volume(E) — Volume of a solid region E in m³. M = ∭_E ρ(x, y, z) dV — Mass M (kg) from density ρ (kg·m⁻³). x̄ = (1/M) ∭_E x ρ dV — x-coordinate of centre of mass (m); similar for ȳ and z̄. I_x = ∭_E (y² + z²) ρ dV — Moment of inertia about x-axis (kg·m²); similar for I_y, I_z. Fubini: ∭_E f dV = ∫∫ [ ∫ f dz ] dy dx = … — Evaluate as any iterated integral when bounds describe E and f is integrable. Change of variables: ∭_E f dV = ∭_G f(T(u, v, w)) · |J_T| du dv dw — Use for coordinate transforms. Cylindrical: x = r cosθ, y = r sinθ, z = z; dV = r dr dθ dz — For circular symmetry about z-axis. Spherical: x = r sinθ cosφ, y = r sinθ sinφ, z = r cosθ; dV = r² sinθ dr dθ dφ — For spherical or conical symmetry. Typical z-first bounds: E = { (x, y, z): (x, y) ∈ R_xy, g₁(x, y) ≤ z ≤ g₂(x, y) } — Choose order to simplify limits. Volume between surfaces: V = ∬_{R_xy} [z_upper(x, y) − z_lower(x, y)] dx dy — When z-limits are surfaces.

Worked examples

Example 1: Volume between a paraboloid and a plane (cylindrical coordinates) Given: Region E bounded below by z = x² + y² and above by z = 4. Compute volume V.

Steps:

  1. Choose coordinates: Cylindrical symmetry in x² + y² suggests cylindrical.
  2. In cylindrical: z_lower = r², z_upper = 4. Intersection r² = 4 ⇒ r = 2. θ from 0 to 2π.
  3. Write integral: V = ∭E 1 dV = ∫{θ=0}^{2π} ∫{r=0}^{2} ∫{z=r²}^{4} 1 · r dz dr dθ.
  4. Integrate in order:
    • Inner: ∫_{z=r²}^{4} 1 dz = 4 − r².
    • Next: ∫{r=0}^{2} (4 − r²) r dr = ∫{0}^{2} (4r − r³) dr = [2r² − r⁴/4]_{0}^{2} = 8 − 4 = 4.
    • Outer: ∫_{0}^{2π} 4 dθ = 8π. Final answer: Volume V = 8π m³.

Example 2: Integral over a tetrahedron (Cartesian, z-first order) Evaluate I = ∭_E (x + y + z) dV, where E is the tetrahedron in the first octant bounded by x ≥ 0, y ≥ 0, z ≥ 0, and x + y + z ≤ 1.

Steps:

  1. Geometry: For fixed (x, y) with x ≥ 0, y ≥ 0, and x + y ≤ 1, z varies from 0 to 1 − x − y.
  2. Bounds: z from 0 to 1 − x − y; y from 0 to 1 − x; x from 0 to 1.
  3. Integral: I = ∫{x=0}^{1} ∫{y=0}^{1−x} ∫_{z=0}^{1−x−y} (x + y + z) dz dy dx.
  4. Compute inner integral: ∫_{0}^{1−x−y} (x + y + z) dz = (x + y)(1 − x − y) + (1/2)(1 − x − y)².
  5. Simplify integrand in y and integrate: Let s = 1 − x − y. Then expression = (x + y)s + s²/2 = (x + y)(1 − x − y) + (1/2)(1 − x − y)². Expand in y or integrate directly: Compute J(x) = ∫{y=0}^{1−x} [(x + y)(1 − x − y) + (1/2)(1 − x − y)²] dy. Use substitution u = 1 − x − y ⇒ du = −dy, when y = 0, u = 1 − x; when y = 1 − x, u = 0. Then J(x) = ∫{u=1−x}^{0} [(x + 1 − x − u)u + (1/2)u²] (−du) = ∫{0}^{1−x} [(1 − u)u + (1/2)u²] du = ∫{0}^{1−x} [u − u² + (1/2)u²] du = ∫{0}^{1−x} [u − (1/2)u²] du = [u²/2 − u³/6]{0}^{1−x} = (1/2)(1 − x)² − (1/6)(1 − x)³.
  6. Integrate in x: I = ∫{0}^{1} [(1/2)(1 − x)² − (1/6)(1 − x)³] dx. Let t = 1 − x; dt = −dx; x = 0→ t = 1; x = 1→ t = 0. I = ∫{t=1}^{0} [(1/2)t² − (1/6)t³] (−dt) = ∫{0}^{1} [(1/2)t² − (1/6)t³] dt = [t³/6 − t⁴/24]{0}^{1} = 1/6 − 1/24 = 1/8. Final answer: I = 1/8 (dimensionless).

Example 3: Mass and centre of mass of a non-uniform hemisphere (spherical coordinates) Given: Solid E is the upper hemisphere x² + y² + z² ≤ R² with z ≥ 0 (units: m). Density ρ(x, y, z) = k·z (kg·m⁻³), where k is a constant with units kg·m⁻⁴ so that ρ has units kg·m⁻³. Find mass M and z̄ (centre of mass height).

Steps:

  1. Choose coordinates: Spherical coordinates are natural. Use r ≥ 0, 0 ≤ θ ≤ π/2 (polar from +z), 0 ≤ φ < 2π, with dV = r² sinθ dr dθ dφ and z = r cosθ.
  2. Mass: M = ∭E ρ dV = ∫{φ=0}^{2π} ∫{θ=0}^{π/2} ∫{r=0}^{R} k(r cosθ) · r² sinθ dr dθ dφ = k ∫{0}^{2π} dφ ∫{0}^{π/2} (cosθ sinθ) dθ ∫{0}^{R} r³ dr. Compute: ∫{0}^{2π} dφ = 2π; ∫{0}^{π/2} cosθ sinθ dθ = 1/2; ∫{0}^{R} r³ dr = R⁴/4. Hence M = k · 2π · (1/2) · (R⁴/4) = k π R⁴ / 4 kg.
  3. z-coordinate of centre of mass: z̄ = (1/M) ∭E z ρ dV = (1/M) ∫∫∫ k z² dV. Compute numerator N = ∫{φ=0}^{2π} ∫{θ=0}^{π/2} ∫{r=0}^{R} k(r cosθ)² · r² sinθ dr dθ dφ = k ∫{0}^{2π} dφ ∫{0}^{π/2} cos²θ sinθ dθ ∫{0}^{R} r⁴ dr. Values: ∫{0}^{2π} dφ = 2π; ∫{0}^{π/2} cos²θ sinθ dθ = 1/3; ∫{0}^{R} r⁴ dr = R⁵/5. Thus N = k · 2π · (1/3) · (R⁵/5) = (2π k R⁵)/15. Divide: z̄ = N / M = [(2π k R⁵)/15] / [k π R⁴ / 4] = (8R) / 15. Final answers: Mass M = (k π R⁴ / 4) kg; Centre height z̄ = (8R / 15) m.

Units check: ρ has kg·m⁻³; with ρ = k·z and z in m, k must be kg·m⁻⁴ so that ρ has kg·m⁻³. Then M in kg and z̄ in m are consistent.

Common mistakes

  • Ignoring Jacobian: Forgetting the factor r in cylindrical or r² sinθ in spherical gives wrong answers by a constant factor.
  • Angle conventions: Using θ as azimuth and φ as polar (or vice versa) inconsistently. State your convention and keep it consistent in limits and formulas.
  • Wrong projection: Projecting onto the wrong plane makes inner bounds depend on the wrong variable and complicates or invalidates integration.
  • Skipping absolute value of Jacobian: The change-of-variables formula requires |J|, not J.
  • Units omitted: In applications (mass, moments), forgetting units or using inconsistent density units.
  • Overcomplicating the order: Not changing the order of integration when one order is clearly simpler (e.g., z-first for volume between two z-surfaces).

For your exam

  • Short notes: Describe cylindrical and spherical coordinates and derive their Jacobians clearly.
  • Derivations: Commonly asked — derive dV = r dr dθ dz; derive dV = r² sinθ dr dθ dφ; set up integrals for volume between surfaces and for mass/centre of mass.
  • Numericals: Evaluate volumes and masses for symmetric solids (paraboloids, cylinders, spheres, cones). Choose a coordinate system that simplifies bounds; carry through units.
  • Change of order: Given an iterated integral, sketch region, rewrite limits in a different order, and then evaluate.
  • Diagrams: Clean projections (onto xy, xz, or yz), label intersection curves/surfaces, arrows for variable ranges, and clearly mark limits.
  • Full-marks answers include: correct region description, correct bounds, correct Jacobian (when used), neat step-by-step integration, unit checks, and a boxed final result.

Quick check

  1. Write the triple integral in cylindrical coordinates for the volume of the solid between z = r and z = 3 − r over the disk r ≤ 1.
  2. State the Jacobian (scale factor) for spherical coordinates in the convention θ = polar from +z, φ = azimuth in xy-plane.
  3. For E = {x ≥ 0, y ≥ 0, z ≥ 0, x + y + z ≤ 2}, give z-limits first, then y-limits, then x-limits.

Answers: (1) V = ∫{θ=0}^{2π} ∫{r=0}^{1} ∫_{z=r}^{3−r} 1 · r dz dr dθ. (2) r² sinθ. (3) 0 ≤ z ≤ 2 − x − y; 0 ≤ y ≤ 2 − x; 0 ≤ x ≤ 2.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?