First Year Engineering is coming soon

We're still writing and reviewing the notes for every subject, and we'll open it when every subject is ready. Meanwhile you can practise aptitude, ask Aria about any subject, or see the branches that are ready.

Double integrals in polar coordinates

Double integrals in polar coordinates: definition, Jacobian r, setting limits from r = f(θ), converting x–y regions to r–θ, and evaluating typical exam integrals over circles, sectors, and polar curves.

Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.

Why it matters

Engineers often integrate quantities over circular or radial shapes: heat across a disk, fluid flow through a circular pipe cross-section, mass of a round plate, or electromagnetic field energy around a wire. Polar coordinates make these “round” regions simple to describe and calculate. Using polar form can turn a hard double integral in x–y into a straightforward one in r–θ.

Key ideas

  • Polar coordinates: A point (x, y) in the plane can be represented by polar coordinates (r, θ), where r is the radial distance from the origin (r ≥ 0) and θ is the angle from the positive x-axis to the line joining the origin to the point, measured counterclockwise (θ in radians).
  • Cartesian–polar relations: The coordinate transformations are x = r cos θ and y = r sin θ. Conversely, r = √(x² + y²) and θ = atan2(y, x) (principal angle chosen appropriately for the quadrant).
  • Area element in polar form (Jacobian): The small area element dA in Cartesian coordinates (dA = dx dy) becomes dA = r dr dθ in polar coordinates. This follows from the Jacobian determinant of the transformation (x, y) = (r cos θ, r sin θ):
    • Compute partial derivatives: x_r = cos θ, x_θ = −r sin θ, y_r = sin θ, y_θ = r cos θ.
    • Jacobian J = det([[x_r, x_θ], [y_r, y_θ]]) = (cos θ)(r cos θ) − (−r sin θ)(sin θ) = r(cos² θ + sin² θ) = r.
    • Therefore, |J| = r and dA = |J| dr dθ = r dr dθ.
  • Definition (double integral in polar form): If (x, y) = (r cos θ, r sin θ) maps a region R in the x–y plane to a region S in the r–θ plane, and f is integrable on R, then ∬_R f(x, y) dA = ∬_S f(r cos θ, r sin θ) r dr dθ, provided the transformation is one-to-one on S and f∘T is integrable.
  • Choosing polar coordinates: Use polar coordinates when R or f has circular or radial symmetry, such as disks, annuli (rings), sectors, or when f depends on x² + y². Polar often simplifies both the region and the integrand.
  • Typical polar regions and limits:
    • Full disk of radius a: 0 ≤ r ≤ a, 0 ≤ θ ≤ 2π.
    • Annulus between radii a and b (a < b): a ≤ r ≤ b, 0 ≤ θ ≤ 2π.
    • Sector of angle [α, β] and radius up to g(θ): 0 ≤ r ≤ g(θ), α ≤ θ ≤ β.
    • Region bounded by a polar curve r = g(θ): 0 ≤ r ≤ g(θ) for θ in an interval where g(θ) ≥ 0 and the tracing is single-valued.
  • Converting Cartesian region to polar:
    1. Sketch the region R in x–y.
    2. Identify curves in polar form (e.g., x² + y² = a² becomes r² = a² → r = a).
    3. Choose θ limits to cover R once without overlap.
    4. For each θ, find radial bounds r from the inner curve to the outer curve.
    5. Ensure r ≥ 0 and adjust θ interval to keep r nonnegative.
  • Change of variables theorem (2D, exact statement): Let T: (u, v) ↦ (x(u, v), y(u, v)) be a continuously differentiable, one-to-one transformation mapping a region S in the uv-plane onto a region R in the xy-plane, with continuous partial derivatives and nonzero Jacobian determinant J(u, v) on S (except possibly on a set of measure zero, e.g., r = 0 in polar coordinates). If f is integrable on R, then ∬_R f(x, y) dA = ∬_S f(x(u, v), y(u, v)) |J(u, v)| du dv. For polar coordinates, take (u, v) = (r, θ), and |J| = r.
  • Symmetry in polar integrals: If the angular part is odd in θ on a symmetric θ-interval (e.g., contains sin θ alone over [−α, α]), the θ integral is zero. Over a full 0 to 2π sweep, any pure sine or cosine term with nonzero frequency integrates to zero. Use symmetry to simplify.
  • Improper double integrals in polar: For infinite regions like the whole plane, use r ∈ [0, ∞), θ ∈ [0, 2π). Often, integrals with f depending on r² converge nicely (e.g., Gaussian integrals). Treat r → ∞ limit carefully.
  • What to draw and label (exam diagrams):
    • For a disk or annulus: Draw concentric circles centered at origin, label r = a, r = b, and show θ sweeping 0 to 2π (an arrow around the circle).
    • For a sector: Draw two rays from the origin at θ = α and θ = β, shade between them up to r = g(θ), label α, β, and indicate 0 ≤ r ≤ g(θ).
    • For r = 2 cos θ: Draw the circle with center at (1, 0) and radius 1, showing it lies to the right of the y-axis and touches the origin; label r = 2 cos θ and the θ range −π/2 to π/2.
    • Always add a small polar grid (few circles and radial lines), mark the positive x-axis (θ = 0), and indicate increasing θ counterclockwise.

Formulas

x = r cos θ

  • x: Cartesian x-coordinate (metre, m). r: radial distance from origin (m). θ: angle from +x-axis (radian, rad). Applies for polar-to-Cartesian conversion.

y = r sin θ

  • y: Cartesian y-coordinate (m). r: radial distance (m). θ: angle (rad). Polar-to-Cartesian conversion.

r = √(x² + y²)

  • r: radial distance (m). x, y: Cartesian coordinates (m). Cartesian-to-polar relation.

θ = atan2(y, x)

  • θ: angle (rad). atan2 returns the principal angle considering quadrant. Cartesian-to-polar relation.

dA = r dr dθ

  • dA: area element (m²). r: radial coordinate (m). dr: small change in r (m). dθ: small change in θ (rad). Applies for double integrals in polar coordinates.

∬_R f(x, y) dA = ∬_S f(r cos θ, r sin θ) r dr dθ

  • f: scalar field (unit depends on context, e.g., kg/m² for surface mass density). R: region in x–y plane. S: corresponding region in r–θ plane. Applies when mapping is one-to-one with Jacobian r.

x² + y² = r²

  • Relation simplifying many integrands; r (m), x, y (m).

tan θ = y / x (x ≠ 0)

  • θ: angle (rad). x, y: Cartesian coordinates (m). Determine θ from coordinates; adjust for quadrant.

Area of a disk of radius a by polar integral = ∫₀^{2π} ∫₀^{a} r dr dθ = π a²

  • a: radius (m). Resulting area (m²). Applies to circular regions.

Change of variables (2D): ∬_R f(x, y) dA = ∬_S f(x(u, v), y(u, v)) |J(u, v)| du dv

  • J(u, v): Jacobian determinant (with units so that |J| du dv has units of area; for polar, |J| = r). Applies to valid smooth, one-to-one transforms.

Worked examples

Example 1: Evaluate ∬_D (x² + y²) dA where D is the disk x² + y² ≤ a². Given: Disk of radius a (m). Integrand x² + y² (m²). Compute integral value (m⁴). Steps:

  1. Convert integrand and region to polar: x² + y² = r²; D: 0 ≤ r ≤ a, 0 ≤ θ ≤ 2π.
  2. Write integral in polar: ∬_D (x² + y²) dA = ∫₀^{2π} ∫₀^{a} (r²) · (r dr dθ).
  3. Integrate with respect to r: ∫₀^{a} r³ dr = [r⁴/4]₀^{a} = a⁴/4.
  4. Integrate with respect to θ: ∫₀^{2π} (a⁴/4) dθ = (a⁴/4) · 2π = (π a⁴)/2. Final answer: ∬_D (x² + y²) dA = (π a⁴)/2 (unit: m⁴).

Example 2: Find the area enclosed by the polar curve r = 2 cos θ using a double integral. Given: Region R bounded by r = 2 cos θ; this is a circle of radius 1 m centered at (1, 0) m. We compute area by integrating 1 over R. Steps:

  1. Identify θ limits: For r = 2 cos θ to be nonnegative, cos θ ≥ 0 → −π/2 ≤ θ ≤ π/2.
  2. For each θ in [−π/2, π/2], r varies from 0 to r = 2 cos θ.
  3. Write area as ∬R 1 dA = ∫{θ=−π/2}^{π/2} ∫_{r=0}^{2 cos θ} r dr dθ.
  4. Integrate with respect to r: ∫₀^{2 cos θ} r dr = [r²/2]₀^{2 cos θ} = 2 cos² θ.
  5. Integrate with respect to θ:
    • ∫{−π/2}^{π/2} 2 cos² θ dθ = 2 ∫{−π/2}^{π/2} (1 + cos 2θ)/2 dθ = ∫_{−π/2}^{π/2} (1 + cos 2θ) dθ.
    • = [θ + (1/2) sin 2θ]_{−π/2}^{π/2} = (π/2 + 0) − (−π/2 + 0) = π. Final answer: Area = π m², matching the area of a circle of radius 1 m.

Example 3: Evaluate ∬_R x dA over the disk R: x² + y² ≤ a². Given: R is the full disk of radius a (m). Integrand x (m). Expect symmetry to give zero. Steps:

  1. Convert to polar: x = r cos θ; dA = r dr dθ.
  2. Limits: 0 ≤ r ≤ a, 0 ≤ θ ≤ 2π.
  3. Integral: ∬_R x dA = ∫₀^{2π} ∫₀^{a} (r cos θ) · (r dr dθ) = ∫₀^{2π} cos θ dθ ∫₀^{a} r² dr.
  4. Compute radial integral: ∫₀^{a} r² dr = a³/3.
  5. Compute angular integral: ∫₀^{2π} cos θ dθ = 0. Final answer: ∬_R x dA = 0 (unit: m³). Interpretation: positive and negative x contributions cancel by symmetry.

Optional extension if allowed by your instructor: Evaluate ∬_{ℝ²} e^{−(x² + y²)} dA (Gaussian integral).

  • Convert to polar: integrand becomes e^{−r²}, dA = r dr dθ. Limits: r ∈ [0, ∞), θ ∈ [0, 2π).
  • Compute: ∫₀^{2π} dθ ∫₀^{∞} e^{−r²} r dr = 2π · [−(1/2) e^{−r²}]₀^{∞} = 2π · (1/2) = π.
  • Final: π (unitless). This classic result showcases the power of polar coordinates.

Common mistakes

  • Wrong θ limits: Choosing 0 to 2π when the curve only lies where r ≥ 0 for a smaller θ range (e.g., r = 2 cos θ needs θ ∈ [−π/2, π/2]).
  • Misinterpreting negative r: Standard polar integrals use r ≥ 0. If you allow negative r, you must shift θ by π; this usually complicates limits and should be avoided in exam solutions.
  • Not converting the integrand: Keeping f(x, y) as-is and only changing dA, forgetting to replace x, y by r cos θ, r sin θ.
  • Mixing up order and bounds: Writing r-bounds that depend on r or θ-bounds that depend on r incorrectly. Decide and clearly state the order: typically r first, then θ, with r-bounds as functions of θ.
  • Not splitting regions: Some regions require splitting θ intervals where the outer boundary changes definition. Failing to split gives wrong coverage or double counting.
  • Algebra/trig slips: Errors with cos² θ identities, or integrating sin θ, cos θ over symmetric intervals. Always check parity/symmetry.
  • Unit reasoning skipped: When asked for area or physical totals, forget to state final units (m², m³, etc.).

For your exam

  • State and derive dA = r dr dθ from the Jacobian of x = r cos θ, y = r sin θ. Full marks need the partial derivatives, determinant calculation, absolute value, and a clear concluding statement.
  • State the Change of Variables theorem in 2D and specialize to polar coordinates. Include all assumptions (continuously differentiable, one-to-one, nonzero Jacobian, proper mapping of regions).
  • Describe how to set up limits for regions given by r = g(θ) or x² + y² = a². A neat, labeled sketch is expected.
  • Computation/Numericals:
    • Evaluate a double integral over a disk/annulus/sector after converting to polar. Full marks: correct region sketch, correct limits, correct conversion of integrand and dA = r dr dθ, orderly integration with steps and units.
    • Show that an integral is zero by symmetry (e.g., ∬_disk x dA). Full marks: symmetry argument or correct θ-integration to zero.
    • Integrals with f depending on x² + y² (e.g., e^{−(x² + y²)}), possibly over infinite regions. Full marks: correct improper limits and convergence reasoning.
  • Diagrams:
    • Draw and label θ-ranges, radial bounds, and key curves (r = constant, θ = constant lines). The drawing should reflect the exact limits you write.

Tip: Always start with a sketch; write limits clearly; convert both the integrand and dA; check endpoints and symmetry; and carry units to the end if the quantity has physical meaning.

Quick check

  1. Write dA in polar coordinates and state what r, dr, and dθ represent.
  2. Set up, but do not evaluate, the double integral for the area inside the cardioid r = a(1 + cos θ).
  3. Convert the integrand x² + y² to polar form, and give the θ limits for the full disk. Answers: 1) dA = r dr dθ, where r is radial distance (m), dr is an infinitesimal change in r (m), dθ is an infinitesimal change in angle (rad). 2) Area = ∫{θ=−π}^{π} ∫{r=0}^{a(1 + cos θ)} r dr dθ (other equivalent θ-intervals of length 2π also valid where r ≥ 0). 3) x² + y² = r²; for the full disk, θ from 0 to 2π.

Finished this topic? Mark it so your progress, study plan and readiness keep up.

Stuck on something here?