Applications of multiple integrals: area, volume, centre of gravity, moment of inertia
Applications of multiple integrals to compute area, volume, centre of gravity (centroid), and moment of inertia, with definitions, formulas, and worked examples.
Drafted with Aria, reviewed by the AiCanCode.org team · Updated . How we write and check our notes. Spotted an error? Use Give Feedback at the bottom of the page.
Why it matters
Multiple integrals let engineers compute area and volume of complex shapes and find where the “balance point” (centre of gravity) lies. They also yield moments of inertia, which control bending of beams and rotational dynamics of machines, vehicles, and robots.
Key ideas
- Region of integration: A region R (2D) or V (3D) is the set of points over which we integrate. Typical descriptions:
- x–simple: R = {(x, y): a ≤ x ≤ b, g1(x) ≤ y ≤ g2(x)}.
- y–simple: R = {(x, y): c ≤ y ≤ d, h1(y) ≤ x ≤ h2(y)}.
- In polar coordinates (r, θ), for plane regions with circular symmetry: R = {(r, θ): α ≤ θ ≤ β, 0 ≤ r ≤ R(θ)} with dA = r dr dθ.
- In cylindrical or spherical coordinates for 3D regions when symmetry suggests them.
- Exact statements and definitions used in exams:
- Area by double integral: If R is a measurable plane region, its area A is A = ∬_R 1 dA.
- Volume under a surface: The volume V bounded above by z = f(x, y) and below by the plane z = 0 over a region R in the xy–plane is V = ∬_R f(x, y) dA, assuming f ≥ 0 on R.
- Volume of a solid: For any solid region V, its volume is V = ∭_V 1 dV.
- Mass of a lamina (thin plate) with surface mass density δ(x, y) (kg·m⁻²): M = ∬_R δ(x, y) dA.
- Mass of a solid with volume density ρ(x, y, z) (kg·m⁻³): M = ∭_V ρ(x, y, z) dV.
- Centre of gravity / centroid of a lamina: If δ is uniform, the centroid (x̄, ȳ) is x̄ = (1/A) ∬_R x dA, ȳ = (1/A) ∬_R y dA. For variable density, use x̄ = (1/M) ∬_R x δ dA, ȳ = (1/M) ∬_R y δ dA.
- Centre of mass of a solid: (x̄, ȳ, z̄) = (1/M) ∭_V (x, y, z) ρ dV.
- Mass moment of inertia of a lamina about the x–axis: I_x = ∬_R y² δ dA; about the y–axis: I_y = ∬_R x² δ dA; about an axis through the origin perpendicular to the lamina (z–axis): I_O = ∬_R r² δ dA, where r² = x² + y². For a solid (3D body), I_x = ∭_V (y² + z²) ρ dV, I_y = ∭_V (x² + z²) ρ dV, and I_z = ∭_V (x² + y²) ρ dV.
- Area moment of inertia (second moment of area) about the x–axis: I_x(area) = ∬_R y² dA (units m⁴), and analogously for I_y(area). This is used in beam bending (strength of materials) and is different from mass moment of inertia (units kg·m²).
- Parallel axis theorem (mass moment of inertia): If I_C is mass moment of inertia about a centroidal axis and the new axis is parallel and at distance d, then I = I_C + M d². Assumes rigid body and parallel axes.
- Perpendicular axis theorem (plane lamina/area): For a planar lamina or plane area with mutually perpendicular axes through the same point, I_z = I_x + I_y (mass moments) and I_z(area) = I_x(area) + I_y(area).
- Polar coordinates for integration: If (x, y) = (r cosθ, r sinθ), then dA = r dr dθ. Limits must reflect the geometry.
- Typical derivations examiners ask for (sketches to draw):
- Area via double integral in polar: Derive area of a circle of radius a as A = ∬_R 1 dA = ∫₀^{2π} ∫₀^a 1·r dr dθ = πa². Diagram: draw circle centered at origin, radius a, show a radial line at angle θ, label r from 0 to a, and the ring element with width dr.
- Volume of a paraboloid cap: For z = c − x² − y² with z ≥ 0, show V = ∫∫ (c − r²) r dr dθ over r ∈ [0, √c], θ ∈ [0, 2π]. Diagram: top view a circle of radius √c in xy–plane; side view bowl shape z = c − r² intersecting plane z = 0.
- Centroid of a quarter–disk: For R: x² + y² ≤ a², x ≥ 0, y ≥ 0 with uniform density, derive x̄ = ȳ = 4a/(3π) using polar symmetry. Diagram: first–quadrant quarter circle, show a sector element at angle θ with radius r, label r and θ.
- Disk moment of inertia about central axis: For a uniform disk of radius a and surface density δ, show I_O = ∬ r² δ dA = (1/2) M a², with M = δ π a². Diagram: disk with concentric ring element of radius r and thickness dr, label dA = 2πr dr.
Formulas
A = ∬_R 1 dA
- A is area (m²); R is region in the plane. Use for any plane region.
V = ∬_R f(x, y) dA
- V is volume (m³) under surface z = f(x, y) ≥ 0 above region R. Use when solid is bounded by surface and plane.
V = ∭_V 1 dV
- V is volume (m³) of a 3D region; dV is volume element in chosen coordinates.
M = ∬_R δ(x, y) dA
- M is mass (kg) of a lamina; δ is surface mass density (kg·m⁻²).
M = ∭_V ρ(x, y, z) dV
- M is mass (kg) of a solid; ρ is volume mass density (kg·m⁻³).
x̄ = (1/A) ∬_R x dA, ȳ = (1/A) ∬_R y dA
- (x̄, ȳ) centroid of a uniform lamina; A is area (m²). Use when density is uniform.
x̄ = (1/M) ∬_R x δ dA, ȳ = (1/M) ∬_R y δ dA
- Centre of mass of a lamina with variable δ(x, y) (kg·m⁻²).
(x̄, ȳ, z̄) = (1/M) ∭_V (x, y, z) ρ dV
- Centre of mass of a solid with volume density ρ (kg·m⁻³).
I_x = ∬_R y² δ dA, I_y = ∬_R x² δ dA, I_O = ∬_R (x² + y²) δ dA
- Mass moments of inertia (kg·m²) for a lamina about x–, y–, and z–axes.
I_x(area) = ∬_R y² dA, I_y(area) = ∬_R x² dA
- Area moments of inertia (m⁴) of a region.
I = I_C + M d²
- Parallel axis theorem for mass moment of inertia: I about any axis parallel to centroidal axis; d is perpendicular distance (m), M mass (kg), I, I_C in kg·m².
I(area) = I_C(area) + A d² - Parallel axis theorem for area moment of inertia: I(area) about any axis parallel to a centroidal axis; d is perpendicular distance (m), A is area (m²), I in m⁴.
In polar: x = r cosθ, y = r sinθ, dA = r dr dθ
- Plane polar coordinate relations. Use for circular/sector regions.
In cylindrical: x = r cosθ, y = r sinθ, z = z, dV = r dr dθ dz
In spherical: x = ρ sinφ cosθ, y = ρ sinφ sinθ, z = ρ cosφ, dV = ρ² sinφ dρ dφ dθ
- For solids with circular symmetry along z–axis.
- In spherical coordinates: use for spheres or spherical symmetry; typical limits 0 ≤ ρ ≤ R, 0 ≤ φ ≤ π, 0 ≤ θ ≤ 2π.
Worked examples
Example 1 — Area of region between curves using a double integral Given: Region R in the xy–plane bounded by y = x and y = x² for 0 ≤ x ≤ 1. Find area A.
Steps:
- Sketch: Draw y = x (straight line) and y = x² (parabola). They meet at x = 0 and x = 1. Shade the region between them for x ∈ [0, 1]. Label axes and intersection points (0, 0) and (1, 1).
- Set up as x–simple region: For each x in [0, 1], y varies from lower curve y = x² to upper curve y = x.
- Formula: A = ∬R 1 dA = ∫{x=0}^1 ∫_{y=x²}^{y=x} 1 dy dx.
- Integrate inner integral: ∫_{y=x²}^{y=x} 1 dy = x − x².
- Integrate over x: ∫{0}^{1} (x − x²) dx = [x²/2 − x³/3]{0}^{1} = (1/2 − 1/3) = 1/6.
Answer: Area A = 1/6 m² (if x, y in meters). Final: A = 0.1667 m² (approx). Bold exact: A = 1/6 m².
Example 2 — Volume under a paraboloid using polar coordinates Given: Solid S bounded above by z = 4 − x² − y² and below by the plane z = 0. Compute volume V.
Steps:
- Geometry: The surface is a downward paraboloid. The intersection with z = 0 is x² + y² = 4, a circle of radius 2 in the xy–plane.
- Switch to polar: r² = x² + y². Then z = 4 − r² ≥ 0 implies 0 ≤ r ≤ 2; 0 ≤ θ ≤ 2π.
- Volume as integral under surface: V = ∬R (4 − r²) dA = ∫{θ=0}^{2π} ∫_{r=0}^{2} (4 − r²) (r dr dθ).
- Compute inner integral: ∫{0}^{2} (4r − r³) dr = [2r² − r⁴/4]{0}^{2} = (2·4 − 16/4) = (8 − 4) = 4.
- Multiply by outer integral: ∫_{0}^{2π} 4 dθ = 4·(2π) = 8π.
Answer: Volume V = 8π m³ ≈ 25.133 m³.
Example 3 — Centroid of a quarter–disk (uniform lamina) Given: R is the quarter of a disk of radius a in the first quadrant: x ≥ 0, y ≥ 0, x² + y² ≤ a². Density is uniform. Find the centroid (x̄, ȳ).
Steps:
- Area: A = (1/4) π a².
- Symmetry: By symmetry, x̄ = ȳ.
- Use polar coordinates: x = r cosθ, y = r sinθ, dA = r dr dθ, with 0 ≤ r ≤ a, 0 ≤ θ ≤ π/2.
- Compute x̄: x̄ = (1/A) ∬R x dA = (1/A) ∫{0}^{π/2} ∫{0}^{a} (r cosθ) r dr dθ = (1/A) (∫{0}^{π/2} cosθ dθ) (∫_{0}^{a} r² dr).
- Evaluate: ∫{0}^{π/2} cosθ dθ = 1; ∫{0}^{a} r² dr = a³/3. Thus numerator = a³/3.
- Divide by area: x̄ = (a³/3) / ((π a²)/4) = (4a)/(3π).
- Hence ȳ = x̄ = 4a/(3π).
Answer: Centroid (x̄, ȳ) = (4a/(3π), 4a/(3π)) m. For example, if a = 0.5 m, x̄ = ȳ ≈ 0.2122 m.
Example 4 — Mass moment of inertia of a uniform disk (thin plate) about its central axis Given: A uniform circular disk (thin plate) of radius a = 0.30 m, thickness negligible, surface mass density δ = 7.5 kg·m⁻². Find mass M and mass moment of inertia I_O about the z–axis through its center (perpendicular to the disk).
Steps:
- Mass: M = δ × area = δ π a² = 7.5 × π × (0.30)² kg.
- Compute: (0.30)² = 0.09; π × 0.09 ≈ 0.282743; M ≈ 7.5 × 0.282743 = 2.12057 kg.
- Keep exact: M = 7.5 π (0.30)² kg = 0.675 π kg ≈ 2.1206 kg.
- Moment of inertia formula in polar: I_O = ∬R r² δ dA = δ ∫{0}^{2π} ∫{0}^{a} r² (r dr dθ) = δ ∫{0}^{2π} dθ ∫_{0}^{a} r³ dr.
- Integrate: ∫{0}^{a} r³ dr = a⁴/4; ∫{0}^{2π} dθ = 2π. So I_O = δ (2π) (a⁴/4) = (1/2) δ π a⁴.
- Express in terms of M: Since M = δ π a², I_O = (1/2) M a².
- Substitute numbers: I_O = (1/2) × 2.12057 × (0.30)² kg·m² = 0.5 × 2.12057 × 0.09 = 0.09542565 kg·m².
Answer: Mass M = 0.675π kg ≈ 2.1206 kg; mass moment of inertia I_O = (1/2) M a² ≈ 0.09543 kg·m².
Common mistakes
- Using centroid formulas for uniform density when density is variable; for variable density always divide by total mass M, not by area A.
- Wrong limits from the sketch: not identifying which curve is “top” vs “bottom” (or “right” vs “left”) when setting inner integral limits.
- Integrating f(x, y) over a region where f becomes negative when asked for a volume under a surface; ensure z = f(x, y) ≥ 0 or split the region or use absolute geometry.
- Dropping symmetry opportunities: doing two integrals when one suffices (e.g., x̄ = ȳ by symmetry in quarter–disk).
- Rounding too early; carry symbols or at least four significant figures until the final answer.
For your exam
- Derivations: Common ones include area of a circle via polar integration, centroid of a planar sector or quarter–disk, and mass moment of inertia of a disk or ring (leading to I = (1/2) M a² for a disk and I = M a² for a thin ring).
- Numericals: Set up integrals with correct limits from a clear sketch. Write the formula first, then substitute. Keep units through steps and in the final answer.
- Diagrams: Draw axes, label curves or surfaces, mark limits (intersections), shade the region or outline the solid’s projection. For revolving solids, show a typical element (ring or shell) with labels like r, dr, dA.
- Full-marks answers: Include (i) a neat labeled sketch, (ii) correct limits, (iii) correct coordinate choice and Jacobian, (iv) step-by-step integration, (v) clear final numerical value with units and, when possible, the exact form.
Quick check
- Write the formula for the centroid (x̄, ȳ) of a lamina with variable surface density δ(x, y).
- For z = 9 − x² − y² with z ≥ 0, what are the polar limits for r and θ to compute volume under the surface?
- State the difference in units between mass moment of inertia and area moment of inertia.
Answers: (1) x̄ = (1/M) ∬ x δ dA, ȳ = (1/M) ∬ y δ dA with M = ∬ δ dA. (2) 0 ≤ r ≤ 3, 0 ≤ θ ≤ 2π. (3) Mass moment: kg·m²; area moment: m⁴.
Finished this topic? Mark it so your progress, study plan and readiness keep up.
Stuck on something here?