SUK TY Mechanical syllabus

SUK · Third Year B.Tech. Mechanical Engineering · NEP 2020

Machine Tool Design

ME0264 · Programme Elective II · Semester VI · 3 credits · ISE 10 + mid-semester 30 + ESE 60

One of the Programme Elective II options.

  1. Unit 1: General Principles of Machine Tool Design

    5 hours

    General requirements, specifications and layout of machine tools, machining range and interference diagrams, working and auxiliary motions.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Machine tools and their general requirements
    • Working and auxiliary motions in machine tools
  2. Unit 2: Regulation of Speed and Feed Rates

    10 hours

    Speed and feed boxes, stepped regulation of speed, design of speed and feed boxes and special cases.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stepped speed regulation and geometric progression
    • Design of speed gearboxes
    • Design of feed gearboxes
  3. Unit 3: Design of Machine Tool Structure

    7 hours

    Requirements and design criteria, materials, static and dynamic stiffness, profiles, beds, columns and housings.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Machine tool structures: materials and design criteria
    • Static and dynamic stiffness of machine tool structures
    • Design of beds and columns
  4. Unit 4: Design of Guideways and Power Screws

    7 hours

    Functions and types of guideways, design of slideways, protecting devices, power screws.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Functions and types of guideways
    • Design of slideways for wear and stiffness
    • Protecting devices for slideways
    • Power screw terminology and torque
  5. Unit 5: Design of Spindles, Spindle Supports and Hoists

    7 hours

    Spindle materials and design, antifriction and sliding bearings for spindles; hoisting drives, mechanisms and rail-travelling gear.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Design of spindles and spindle supports
    • Conveyors, cranes and hoists: selection and capacity
  6. Unit 6: AI-Enabled Machine Tool Design and Smart Manufacturing

    5 hours

    AI in modern manufacturing and the move from conventional to smart machine tools in Industry 4.0.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • AI in heat exchangers, IC engines and manufacturing

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.