SUK · Third Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020
Embedded Linux
ETC0254 · Programme Elective I · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60
One of the Programme Elective I options.
Unit 1: Introduction to Embedded Linux
6 hoursEmbedded systems and operating systems, the need for embedded Linux, its advantages and limits, its architecture and comparison with an RTOS.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Embedded Linux and the GPL
- Embedded Linux architecture
Unit 2: Linux System Architecture
6 hoursThe Linux kernel, user and kernel space, the file system hierarchy, process management and scheduling, memory management.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Linux kernel, user space and process management
Unit 3: Embedded Linux Development Environment
6 hoursCross-compilation, toolchains and build systems, BusyBox, root file systems, Yocto and Buildroot.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Cross-development environment
- Embedded tool chain and porting
- Root file systems, BusyBox, Yocto and Buildroot
Unit 4: Booting and File Systems
6 hoursBootloaders and U-Boot, the Linux boot sequence, flash file systems (JFFS2, YAFFS, EXT), mounting and managing file systems.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Bootloaders and U-Boot
- File systems, cross-compilation and debugging
Unit 5: Linux System Programming
6 hoursSystem calls, process creation, IPC with pipes, signals and shared memory, threads, file I/O.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Linux system programming: system calls, IPC and threads
Unit 6: Device Drivers and Embedded Applications
6 hoursLinux device drivers and character drivers, GPIO and peripheral interfacing, embedded Linux in IoT, case studies.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Linux device drivers and modules
- Development boards: Arduino and Raspberry Pi
Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.