SUK TY E&TC syllabus

SUK · Third Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020

Antenna and Microwave Engineering

ETC0251 · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60

4 credits: 3 for theory and 1 for the lab, examined separately (25 + 25).

  1. Unit 1: Antenna Basics

    6 hours

    Radiation mechanism; radiation patterns, main and side lobes, beamwidths, beam area, radiation intensity, beam efficiency, directivity, gain, impedance, apertures and aperture efficiency, effective height, reflection coefficient.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Isotropic radiators and radiation patterns
    • Gain, directivity and the reciprocity theorem
    • Effective aperture and radiation resistance
    • Beamwidth, beam solid angle, bandwidth and polarisation
  2. Unit 2: HF, VHF and UHF Antennas

    6 hours

    Travelling-wave radiators, long-wire, V and rhombic antennas, small loops, helical antennas, Yagi–Uda arrays and log-periodic antennas.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Long-wire, V, rhombic and helical antennas
    • Small circular and rectangular loop antennas
    • Yagi–Uda antennas
    • Log-periodic antennas
  3. Unit 3: Microwave Antennas

    6 hours

    Flat-sheet, corner and parabolic reflectors and their feeds; slot, microstrip, horn and lens antennas.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Reflector antennas: plane, corner and parabolic
    • Microstrip patch antennas and feeding methods
    • Horn antennas: sectoral, pyramidal and conical
    • Dielectric and metal-plate lens antennas
  4. Unit 4: Waveguides and Microwave Components

    6 hours

    Rectangular waveguides: TE and TM modes, power transmission and losses, mode excitation; cavities, hybrid circuits, directional couplers, circulators, isolators and attenuators.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Rectangular waveguides and modes
    • Waveguide excitation and coupling
    • Cavity resonators
    • E-plane, H-plane and magic tees
    • Directional couplers
    • Isolators and circulators
  5. Unit 5: Microwave Tubes

    6 hours

    Linear-beam tubes: klystrons, re-entrant cavities, velocity modulation and bunching, the reflex klystron, slow-wave structures and the helix TWT; crossed-field tubes: the magnetron.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Velocity modulation and klystrons
    • Reflex klystron
    • Helix travelling wave tube
    • Cavity magnetron
  6. Unit 6: Microwave Solid-State Devices

    6 hours

    Microwave BJTs and FETs, tunnel diodes, Gunn diodes and RWH theory, LSA and InP diodes, IMPATT and PIN diodes, MESFETs and HEMTs.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Microwave transistors
    • Gunn diode
    • IMPATT and TRAPATT diodes
    • PIN, tunnel and Schottky diodes

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.