SUK TY Electrical syllabus

SUK · Third Year B.Tech. Electrical Engineering · NEP 2020

Power System Analysis

EE0363 · Semester VI · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Symmetrical Components and Sequence Networks

    6 hours

    Symmetrical components of unbalanced phasors, power in terms of symmetrical components; sequence circuits of lines, synchronous machines and transformers; unsymmetrical series impedances.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Symmetrical components
    • Sequence impedances and sequence networks
  2. Unit 2: Unsymmetrical Faults

    8 hours

    Single line-to-ground, line-to-line, double line-to-ground and open-conductor faults.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Single line-to-ground fault
    • Line-to-line fault
    • Double line-to-ground fault
    • Open conductor faults
  3. Unit 3: Power-Flow Analysis

    6 hours

    Power-flow equations; Gauss–Seidel, Newton–Raphson, decoupled and fast decoupled methods compared; power-flow software.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Load flow equations and bus classification
    • Gauss-Seidel load flow
    • Newton-Raphson load flow
    • Decoupled and fast decoupled load flow
  4. Unit 4: Power System Stability

    6 hours

    Steady-state and transient stability, rotor dynamics and the swing equation, equal area criterion, step-by-step swing curves, multimachine stability.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Swing equation
    • Equal area criterion
    • Step-by-step solution of the swing equation
    • Methods to improve stability
  5. Unit 5: Load Frequency Control

    8 hours

    Importance of LFC, frequency in multimachine systems and in steady state, frequency-dependent loads, speed governors and their characteristics; AGC objectives and implementation.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Load frequency control of an isolated system
    • Speed governing and turbine models
    • Automatic generation control
  6. Unit 6: Reactive Power Compensation

    8 hours

    Production and absorption of reactive power; shunt capacitors, reactors, tap-changing transformers and static VAR compensators.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Reactive power compensation
    • Tap-changing transformers and ULTC control
    • Synchronous condensers and static VAR systems

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.