SUK TY Electrical syllabus

SUK · Third Year B.Tech. Electrical Engineering · NEP 2020

Power Electronics

EE0361 · Semester VI · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Power Semiconductor Switches

    7 hours

    Power diodes and transistors, MOSFET, IGBT and GTO; SCR firing circuits; comparison of MOSFET, thyristor, GTO, BJT and IGBT.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Power diodes and power BJTs
    • Power MOSFET and IGBT
    • GTO and MCT
    • SCR triggering circuits
  2. Unit 2: Single-Phase and Three-Phase Rectifiers

    7 hours

    Single-phase half-wave and full-wave diode bridges, three-phase half-wave and full-wave bridges; transformer rating and the source current, DC current and output voltage waveforms.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Single-phase half-wave rectifier
    • Full-wave centre-tap and bridge rectifiers
    • Three-phase bridge rectifier
    • Rectifier performance parameters
  3. Unit 3: Phase-Controlled AC to DC Converters

    8 hours

    Single-phase half- and fully controlled converters, three- and six-pulse converters, freewheeling diode; source inductance and overlap; displacement and distortion factors, THD, ripple and transformer utilisation factors.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Single-phase half-controlled converter
    • Single-phase fully controlled converter
    • Freewheeling diode
    • Three-phase fully controlled converter
    • Effect of source inductance and overlap angle
    • Converter performance parameters
  4. Unit 4: DC to DC Converters

    6 hours

    Control of choppers; buck converter with RLE load, boost and buck–boost converters, the full-bridge DC–DC converter, multiphase choppers and the Cuk converter.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Chopper principle and control techniques
    • Buck converter
    • Boost converter
    • Buck-boost converter
  5. Unit 5: Switch-Mode DC–AC Inverters

    7 hours

    Single-phase half- and full-bridge inverters, the three-phase six-step inverter in 120° and 180° modes, three-phase PWM, sinusoidal PWM and selective harmonic elimination; voltage and frequency control.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Single-phase full-bridge inverter
    • Three-phase inverter: 120 and 180 degree modes
    • PWM techniques
    • Voltage control of single and three-phase inverters
  6. Unit 6: Cycloconverters and Matrix Converter

    7 hours

    Single- and three-phase cycloconverters; matrix converter topologies, control and performance; applications.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Cycloconverters
    • Matrix converters

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.