SUK · Third Year B.Tech. Electrical Engineering · NEP 2020
Digital Protection
EE0354 · Programme Elective I · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60
One of the Programme Elective I options.
Unit 1: Fundamentals of Power System Protection
6 hoursNeed for protection, components of a protection system, zones, primary and backup protection; sensitivity, selectivity, reliability and speed; classification of relays.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Zones of protection
- Primary and backup protection
- Classification of protective relays and automatic reclosing
Unit 2: Conventional and Static Relays
8 hoursAttraction and induction electromagnetic relays, the induction disc relay; static relays, their merits and limits; amplitude and phase comparators.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Induction relay, PSM and TSM
- Static relays
- Static relay comparators: amplitude and phase
Unit 3: Digital and Numerical Relays
6 hoursDigital protection and the digital relay block diagram; sampling, signal conditioning and filtering, A/D conversion; microprocessor-based and numerical relays.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Numerical relays
- Microprocessor-based overcurrent and impedance relays
- Digital relaying algorithms: Mann-Morrison and Fourier
Unit 4: Protection of Transmission Lines
6 hoursOvercurrent and directional protection; impedance, reactance and mho distance relays; carrier current protection.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Overcurrent and directional relays
- Distance relays: impedance, reactance and mho
- Carrier protection and PLCC
Unit 5: Protection of Power System Equipment
8 hoursTransformer differential and Buchholz protection; generator, motor and bus-bar protection.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Transformer differential protection
- Buchholz relay and inrush
- Alternator protection
- Induction motor protection
- Bus zone and frame leakage protection
Unit 6: Circuit Breakers and Modern Protection
8 hoursArc formation and extinction; oil, air-blast, SF6 and vacuum breakers compared; SCADA-based, adaptive and smart-grid protection.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Arc formation and interruption
- Air-break, oil and air-blast circuit breakers
- SF6 circuit breaker
- Vacuum circuit breaker
- Wide area measurement systems
Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.