SUK TY Electrical syllabus

SUK · Third Year B.Tech. Electrical Engineering · NEP 2020

Control Systems

EE0352 · Semester V · 3 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Introduction to Control Systems and Mathematical Modelling

    8 hours

    Types of systems and feedback control; modelling of electrical and mechanical systems, force–voltage and force–current analogies; transfer functions by block-diagram reduction and signal flow graphs; poles and zeros.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Open-loop and closed-loop systems
    • Modelling electrical and mechanical systems
    • Electrical-mechanical analogies
    • Block diagram reduction
    • Signal flow graphs and Mason's gain formula
    • Transfer function, poles and zeros
  2. Unit 2: Time Domain Analysis and Stability

    7 hours

    First- and second-order time response, steady-state error and static error constants, time-response specifications, stability and the Routh–Hurwitz criterion.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Response of first-order systems
    • Response of second-order systems
    • Time-domain specifications
    • Steady-state error and error coefficients
    • Routh-Hurwitz criterion
  3. Unit 3: PID Controller

    6 hours

    P, PI and PID controllers, Ziegler–Nichols tuning; PID control of temperature, motion and level.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • P, PI and PID controllers
    • Ziegler-Nichols tuning
  4. Unit 4: Root Locus Technique

    7 hours

    Rules for root loci, root contours, stability from the root locus, effect of adding poles and zeros.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Root locus construction
    • Stability from the root locus
  5. Unit 5: Frequency Response Analysis

    7 hours

    Frequency-domain specifications; stability from Bode, polar and Nyquist plots; correlation of time and frequency domains.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Frequency-domain specifications
    • Bode plots
    • Gain margin and phase margin
    • Polar plots
    • Nyquist stability criterion
  6. Unit 6: State Space Representation

    7 hours

    Phase-variable and canonical forms, conversion between transfer function and state space, the state transition matrix, eigenvalues, solution of state equations, controllability and observability.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • State variables and state-space representation
    • State equations from transfer functions
    • State transition matrix and the Cayley-Hamilton method
    • Controllability and observability

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.