SUK TY Civil syllabus

SUK · Third Year B.Tech. Civil Engineering · NEP 2020

Transportation Engineering

CE0263 · Semester VI · 4 credits · ISE 10 + mid-semester 30 + ESE 60

  1. Unit 1: Introduction to Highway Engineering

    8 hours

    Road development in India and road statistics; planning surveys; IRC, NHAI and NHDP; terrain, design speed, vehicle characteristics and cross-section elements; stopping, overtaking and intersection sight distance.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Road development plans in India
    • Highway cross-section elements
    • Sight distance
  2. Unit 2: Geometric Design of Highways

    6 hours

    Alignment and surveys, horizontal curves, superelevation, widening and transition curves; gradients, grade compensation and vertical curves; the safe-system approach; highway drainage.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Highway alignment
    • Design of horizontal alignment
    • Design of vertical alignment
    • Highway drainage
  3. Unit 3: Introduction to Traffic Engineering

    6 hours

    Scope of traffic engineering, traffic flow and statistical analysis of traffic data, regulation and control, types of intersection, highway capacity.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Traffic characteristics and studies
    • Traffic flow and capacity
    • Traffic control devices
    • Design of intersections
  4. Unit 4: Introduction to Railway Engineering

    8 hours

    Rails, sleepers, ballast and fastenings, track stresses, coning of wheels, creep and rail defects; alignment surveys and geometric design, points and crossings; electrification, ballastless track, metro, hyperloop and high-speed rail.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Permanent way and its components
    • Coning of wheels and creep of rails
    • Geometric design of railway track
    • Points, crossings and turnouts
    • Urban rail: LRT and MRTS
  5. Unit 5: Introduction to Airport Engineering

    6 hours

    Air transport and airport classification, planning, site selection and layouts; runway orientation, wind rose and length; passenger facilities; marking, pavement and lighting.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Airport planning and runway orientation
    • Runway length and geometric design of runways
    • Taxiways, aprons and airport drainage
  6. Unit 6: Docks, Harbours and Tunnels

    6 hours

    Planning, classification and layout of harbours and terminal facilities; wave action and coastal protection; dry and wet docks; tunnel size and shape, tunnelling in hard rock and soft ground, lining, lighting, drainage and ventilation, TBMs and trenchless methods.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Docks and harbours: types and planning
    • Port operations and berthing facilities
    • Tunnelling: methods, lining, drainage and ventilation

Unit contents are summarised from the official SUK syllabus . AiCanCode.org is not affiliated with Shivaji University, Kolhapur.